Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : uxcell
BulletPoint1 : Hand Threading Tap Size: Thread size: 1/2-20 UNF; total length: 79.5mm / 3.13"; thread length: 41mm / 1.61"; square end width: 7mm / 0.28"; accuracy class: 2B. Right hand thread cutting, fast tapping with accuracy.
BulletPoint2 : Taper Style Tap: Taper tap starts the thread and guide it into the workpiece. The straight groove design of the hand tap can quickly remove chips downward, reduce operating resistance, and achieve efficient processing. The thread is clear and burr-free, which can achieve precise tapping.
BulletPoint3 : Wide Applications: Hand taps are mainly used with tap wrenches and are suitable for re-tapping damaged or stuck threads, or to create new threads. The threading tools are used for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic.
BulletPoint4 : M2 (6542) High Speed Steel: It has high hardness, good wear resistance, is not easy to deform, heat-resistant and has a long service life. It is characterized by only a matrix without any coating, and is suitable for general thread tapping.
BulletPoint5 : Tips: Add appropriate tapping oil for higher quality internal threads and more durable screw taps. Ensure proper alignment, use proper tapping technique, and apply consistent pressure as you turn the tap to achieve clean, precise threads. Periodically reverse while tapping to break up chips and remove debris from the flutes
EarringDesign : stud
ExternallyAssignedProductIdentifier : 8718375410806
FinishType : Uncoated
GpsrSafetyAttestation : 1
IncludedComponents : Pin
ItemName : uxcell Hand Taper Tap 1/2-20 UNF 2B Thread Taper Style Taps Straight Flute Screw Tapping Threading Tool High Speed Steel HSS6542
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 3.54 inches
ItemPackageDimensions_Width : 2.36 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hand-threading-taps
Manufacturer : uxcell
Material : M2 / 6542 High Speed Steel
ModelName : 7/8-9 UNC
ModelNumber : 38760-MOQ2
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : a25012000ux0422
PowerSourceType : hand_powered
ProductDescription : Specifications:
Style: Taper Tap
Thread Size: 1/2-20 UNF
Total Length: 79.5mm / 3.13"
Thread Length: 41mm / 1.61"
Square End Width: 7mm / 0.28"
Accuracy Class: 2B
Cutting Direction: Right Hand
Material: M2 / 6542 High Speed Steel (HSS6542)
Finish: Uncoated

Package Content:
1pcs x Hand Taper Thread Tap

Descriptions:Taper tap starts the thread and guide it into the workpiece. The straight groove design of the hand tap can quickly remove chips downward, reduce operating resistance, and achieve efficient processing. The thread is clear and burr-free, which can achieve precise tapping.
Hand taps are mainly used with tap wrenches and are suitable for re-tapping damaged or stuck threads, or to create new threads. Used for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic.
M2 (6542) high-speed steel has high hardness, good wear resistance, is not easy to deform, and has a long service life. It is heat-resistant and maintains stability in high-temperature environments. It is characterized by only a matrix without any coating, and is suitable for general thread tapping.
Add appropriate tapping oil for higher quality internal threads and more durable screw taps. Ensure proper alignment, use proper tapping technique, and apply consistent pressure as you turn the tap to achieve clean, precise threads.
Periodically reverse while tapping to break up chips and remove debris from the flutes, preventing clogging and ensuring smooth operation. Please apply anti-rust oil after use to extend the service life.

ProductSiteLaunchDate : 2025-04-17T10:25:20.564Z
Size : 1/2-20 UNF
SpecificUsesForProduct : Tapping
Style : Taper Tap
SupplierDeclaredDgHzRegulation : not_applicable
TargetGender : female
UnitCount : 1
UnspscCode : 31161500