Cart 2 india

Specification
Brand : Aceteel
BulletPoint1 : 【Size】Length: 10.2"/260mm, Thread Head: 6.7"/170mm.
BulletPoint2 : 【Feature】Made of High-speed steel with high hardness and toughness, provide rapid chip removal for efficient threading.
BulletPoint3 : 【Application】Make or repair thread, suitable for most metals, copper, alloy steel, cast iron, aluminum, brass, abrasive steel, A3 steel, iron plate ETC.
BulletPoint4 : 【Usage】Can be used with manual equipment or special processing consoles for tapping, Appropriate addition of coolant can extend the service life when tapping.
BulletPoint5 : 【Package Included】1pc ACME 1 1/4"-8 Left Hand Trapezoidal Tap.
ItemName : Aceteel ACME 1-1/4-8 Trapezoidal Tap, ACME 1 1/4"-8 HSS Trapezoidal Thread Tap Left Hand
ItemTypeKeyword : thread-milling-taps
Manufacturer : Aceteel
PartNumber : ACL_ACME_1 1/4-8_LH
ProductDescription : Size: ACME 1 1/4"-8 Trapezoidal Thread Taps.
Cutting Direction: Left Hand.
Material: High Speed Steel.

Easy to Use
It can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc.

Control the speed according to the hardness of the material. The higher the hardness of the processed product, the slower the speed.
Recommended feed rate: General steel: 6-15m/min; harder steel: 5-10m/min; cast iron: 8-10m/min.

Tips
1. Before tapping confirm whether the diameter of the round hole is appropriate, and to take protective measures when working.
2. When tapping, it is necessary to add water or coolant to cool down to prevent excessive temperature and reduce tap loss. If it encounters difficulty in rotation, the tapping should be suspended.
3. Be sure to select the appropriate cutting oil for the complex tapping process and apply anti-rust oil for maintenance after use.
ProductSiteLaunchDate : 2022-06-16T00:00:00.000-07:00
Size : ACME 1-1/4"-8 LH
UnspscCode : 27111700