Cart 2 india

Specification
Brand : Aceteel
BulletPoint1 : 【Size】Length: 5.12"/130mm, Thread Head: 1.77"/45mm, Square Head: 14.0mm x 14.0mm (L*W), Shank Diameter:18.0mm, Pitch: 1.5mm.
BulletPoint2 : 【Feature】Straight flute thread design, made of High-speed steel with high hardness and toughness, Titanium coating for improving wear and fusion resistance, long service life.
BulletPoint3 : 【Application】Make or repair thread, suitable for most metals, copper, alloy steel, stainless steel(below 30HRC), cast iron, aluminum, brass, abrasive steel, A3 steel, iron plate ETC.
BulletPoint4 : 【Usage】Can be used with manual equipment or special processing consoles for tapping, Appropriate addition of coolant can extend the service life when tapping.
BulletPoint5 : 【Package Included】1pc Metric Right Hand M25x1.5mm High-Speed Steel Titanium Coated Thread Tap.
Color : Silver
FinishType : No
GpsrSafetyAttestation : 1
ItemDisplayWeight : 7.81 ounces
ItemName : Aceteel Metric M25 X 1.5 HSS Ti-Coated Straight Flute Thread Tap, M25 X 1.5mm Titanium Coated Thread Machine Tap Right Hand
ItemPackageDimensions_Height : 2.36 inches
ItemPackageDimensions_Length : 3.54 inches
ItemPackageDimensions_Width : 2.36 inches
ItemPackageQuantity : 4
ItemShape : Straight
ItemTypeKeyword : thread-milling-taps
Manufacturer : Aceteel
Material : High-Speed Steel 6542 (HSS 6542)
ModelName : 2-56 UNC
ModelNumber : M8 x 1mm
NumberOfBoxes : 1
NumberOfItems : 4
PackageLevel : unit
PartNumber : M25x1.5mm
ProductDescription : Size: M25X1.5 Straight Flute Thread Taps.
Cutting Direction: Right Hand.
Material: High Speed Steel, Ti-Coated.

Straight Flute Thread Taps
Straight flute design, used for through hole and shallow blind hole tapping, not for blind hole tapping.

Easy to Use
It can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc.

Control the speed according to the hardness of the material. The higher the hardness of the processed product, the slower the speed.
Recommended feed rate: General steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Tips
1. Before tapping confirm whether the diameter of the round hole is appropriate, and to take protective measures when working.
2. When tapping, it is necessary to add water or coolant to cool down to prevent excessive temperature and reduce tap loss. If it encounters difficulty in rotation, the tapping should be suspended.
3. Be sure to select the appropriate cutting oil for the complex tapping process and apply anti-rust oil for maintenance after use.
ProductSiteLaunchDate : 2022-03-30T00:00:00.000-07:00
Size : M25x1.5mm
SpecificUsesForProduct : Tapping
Style : Straight Flute Tap
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500