Cart 2 india

Specification
Brand : Aceteel
BulletPoint : CNC milling Cutter Head, SE45-125-40-6T， Milling Diameter 125mm, 6 Edges, Installation Inner Hole 40mm Comes with 50pcs milling Blade SEET13T3AGSN-JM
BulletPoint1 : 【Size】Length: 3.50"/89mm, Thread Head: 1.14"/29mm, Square Head: 7.1mm x 7.1mm (L*W), Shank Diameter:9.0mm, Pitch: 1.25mm.
BulletPoint2 : 【Feature】Standard thread design, made of High-speed steel with high hardness and toughness, provide rapid chip removal for efficient threading.
BulletPoint3 : 【application】Make or repair thread, suitable for most metals, copper, alloy steel, cast iron, aluminum, brass, abrasive steel, A3 steel, iron plate ETC.
BulletPoint4 : 【Usage】Can be used with manual equipment or special processing consoles for tapping, Appropriate addition of coolant can extend the service life when tapping.
BulletPoint5 : 【Package Included】1pc M13 x 1.25mm Left Hand Metric Thread Tap.
IncludedComponents : 1/2-Inch Collet
ItemDisplayWeight : 2.23 ounces
ItemName : Aceteel Metric Thread Tap M13 X 1.75, Left Hand HSS Machine Tap M13 x 1.75mm
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 16 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemTypeKeyword : thread-milling-taps
Manufacturer : Aceteel
Material : High speed steel
MeasurementSystem : Metric
ModelName : Bognajiny90gcnv7eh
ModelNumber : Bognajiny90gcnv7eh
NumberOfItems : 1
PartNumber : T_Left_M13x1.75mm
PowerSourceType : ac/dc
ProductDescription : Size: M13X1.25 Straight Flute Thread Taps.
Cutting Direction: Left Hand.
Material: High Speed Steel.

Straight Flute Thread Taps
Straight flute design, used for through hole and shallow blind hole tapping, not for blind hole tapping.

Easy to Use
It can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc.

Control the speed according to the hardness of the material. The higher the hardness of the processed product, the slower the speed.
Recommended feed rate: General steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Tips
1. Before tapping confirm whether the diameter of the round hole is appropriate, and to take protective measures when working.
2. When tapping, it is necessary to add water or coolant to cool down to prevent excessive temperature and reduce tap loss. If it encounters difficulty in rotation, the tapping should be suspended.
3. Be sure to select the appropriate cutting oil for the complex tapping process and apply anti-rust oil for maintenance after use.
ProductSiteLaunchDate : 2022-02-17T00:00:00.000-08:00
Size : M13x1.75mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27111700