Cart 2 india

Specification
Brand : Aceteel
BulletPoint1 : 【Size】Length: 4.02"/102mm, Thread Head: 0.87"/22mm, Square Head: 11.2mm x 11.2mm (L*W), Shank Diameter:14.0mm, Pitch: 1.0mm.
BulletPoint2 : 【Feature】Standard thread design, made of High-speed steel with high hardness and toughness, provide rapid chip removal for efficient threading.
BulletPoint3 : 【application】Make or repair thread, suitable for most metals, copper, alloy steel, cast iron, aluminum, brass, abrasive steel, A3 steel, iron plate ETC.
BulletPoint4 : 【Usage】Can be used with manual equipment or special processing consoles for tapping, Appropriate addition of coolant can extend the service life when tapping.
BulletPoint5 : 【Package Included】1pc M21 x 1mm Left Hand Metric Thread Tap.
CutType : Rounded
EndCutType : Flat End
ExternallyAssignedProductIdentifier1 : 0794697834894
ExternallyAssignedProductIdentifier2 : 794697834894
FinishType : Uncoated
GpsrSafetyAttestation : 1
IncludedComponents : Tap & Die Set
ItemDisplayWeight : 5.2 ounces
ItemName : Aceteel Metric Thread Tap M21 X 1.0, Left Hand HSS Machine Tap M21 x 1mm
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 3.54 inches
ItemPackageDimensions_Width : 2.36 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : thread-milling-taps
Manufacturer : Aceteel
Material : High speed steel
MeasurementSystem : Metric
ModelName : 7/8-9 UNC
ModelNumber : M22x1.5 Thread Tap & Die Set
NumberOfBoxes : 1
NumberOfCuttingEdges : 4
NumberOfFlutes : 4
NumberOfItems : 1
PackageLevel : unit
PartNumber : T_Left_M21x1mm
PowerSourceType : hand_powered
ProductDescription : Size: M21X1 Straight Flute Thread Taps.
Cutting Direction: Left Hand.
Material: High Speed Steel.

Straight Flute Thread Taps
Straight flute design, used for through hole and shallow blind hole tapping, not for blind hole tapping.

Easy to Use
It can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc.

Control the speed according to the hardness of the material. The higher the hardness of the processed product, the slower the speed.
Recommended feed rate: General steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Tips
1. Before tapping confirm whether the diameter of the round hole is appropriate, and to take protective measures when working.
2. When tapping, it is necessary to add water or coolant to cool down to prevent excessive temperature and reduce tap loss. If it encounters difficulty in rotation, the tapping should be suspended.
3. Be sure to select the appropriate cutting oil for the complex tapping process and apply anti-rust oil for maintenance after use.
ProductSiteLaunchDate : 2022-02-17T00:00:00.000-08:00
Size : M21x1mm
SpecificUsesForProduct : Tapping
Style : Taper Tap
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111700