Cart 2 india

Specification
Brand : Auniwaig
BulletPoint1 : 【Standard Designe】- Standard metric thread design; clear and tidy; provide rapid chip removal for efficient threading
BulletPoint2 : 【Multiple uses】- Suitable for most metals; iron plate;copper; zinc; alloy steel;abrasive steel; A3 steel; stainless steel; etc; Appropriate addition of coolant (e.g, water) can extend the service life when tapping
BulletPoint3 : 【Application】- The taper taps can be applied for threading machine and electric drills; use to cut thread inside hole;creating a female surface which functions like a nut
BulletPoint4 : 【Surface Treatment】- Uncoated taps feature just the base substrate without any additional coatings; and fit a wide range of applications
BulletPoint5 : 【Product Details】- Thread Size:M9 x 1.25mm; High-speed steel taps are with high hardness and toughness for wear resistance; well suited for general purpose applications
Color : Sliver
ExternallyAssignedProductIdentifier : 9182428732877
ExternallyAssignedProductIdentifier1 : 0732246831666
ExternallyAssignedProductIdentifier2 : 732246831666
FinishType : Stainless Steel
ItemName : Auniwaig M9 x 1.25mm Pitch Metric Machine Taps HSS, H2 Right Hand Thread Plug Straight Flute Thread Tapping DIY Tool 1pcs
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 5 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : thread-milling-taps
Manufacturer : Auniwaig
Material : High Speed Steel
Material1 : Alloy Steel
Material2 : High Speed Steel
NumberOfPieces : 1
PartNumber : CU3211L2202HF-FBA
ProductDescription : Auniwaig HSS Metric Machine Tap



Package Content:

1pcs x HSS Metric Machine Tap



Description:

1.The mini metric are mainly used for clocks, watches, low hardness wood and soft metal hole processing.

2.Used with some cutting fluid or keep it wet when tapping, the will last longer.

3.Straight 3 flutes are ground to provide rapid chip removal for efficient threading.

4.Suit for machine use to cut thread inside hole, creating a female surface which functions like a nut.

5.Taper offer a very gradual cutting action, is most often used when tapping material is difficult to work (e.g. alloy steel).



Specification:

Number of Flutes:3

Accuracy: H2

Thread Size: M9

Thread standard: Metric

Material: HSS (High-Speed Steel)



Note:

1.First drill the hole with twist drill, and then use the taps tapping. Tapping angle should be vertical 90 degree and keep stable.

2.Tapping depth should not exceed 1.5 times the diameter of the tap: For example: diameter of M5x0.8 about 5mm, the depth should not exceed 7.5mm.

3.Recommended hardness of tapping material is not too high: Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping.

4.Please control speed according to material hardness. The higher the hardness, the slower the speed. Fast speed with small torque; slow speed with high torque. The force must be uniform in tapping operations.


ProductSiteLaunchDate : 2021-06-15T09:13:05.839Z
Size : M9 x 1.25mm
Style : M8 x 1.5
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Iron
UnitCount : 1
UnspscCode : 27111700