Specification Brand : CoCud BulletPoint1 : ★ Thread Tap Size --- Thread size: 1/4-28 UNF (right hand); square shank width: 5mm / 0.2"; thread length: 24mm / 0.94"; overall length: 73mm / 2.87"; accuracy: 2B; flutes quantity: 3 flutes. BulletPoint2 : ★ Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic. BulletPoint3 : ★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping. Add appropriate tapping oil for higher quality internal threads and more durable taps. BulletPoint4 : ★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications. BulletPoint5 : ★ Useful Tips --- Machine tap is recommended for use with tap chucks with overload protection. Using a hand or electric drill can easily cause tap to break and is not recommended. Due to speed overload or non-vertical tapping, chipping or breakage may easily occur. Color : Silver ExternallyAssignedProductIdentifier1 : 0717717664837 ExternallyAssignedProductIdentifier2 : 717717664837 ExternallyAssignedProductIdentifier3 : 00045325200674 FinishType : Uncoated GpsrSafetyAttestation : 1 ItemDisplayDimensions_Height : 0.2 inches ItemDisplayDimensions_Length : 6 inches ItemDisplayDimensions_Width : 2 inches ItemDisplayWeight : 2.64 pounds ItemName : CoCud Thread Milling Taps, 1/4-28 UNF Thread 2B, High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - (Applications: for Tapping Drilling Machine), 2-Pieces ItemPackageDimensions_Height : 14 centimeters ItemPackageDimensions_Length : 1.4 centimeters ItemPackageDimensions_Width : 10.1 centimeters ItemPackageQuantity : 2 ItemTypeKeyword : thread-milling-taps Manufacturer : CoCud Material : High Speed Steel ModelName : 10-32 UNF ModelNumber : cuf220623dd0827 NumberOfItems : 1 PartNumber : cuf220623dd0827 ProductDescription : Attributes: * Thread Size: 1/4-28 UNF (Right Hand) * Square Shank Width: 5mm / 0.2" * Thread Length: 24mm / 0.94" * Overall Length: 73mm / 2.87" * Accuracy: 2B * Material: High Speed Steel (HSS) * Flutes Quantity: 3 Flutes
What Is Included: * 2 Pieces x Thread Milling Taps
Applications & Features: --- Suitable for threading through holes or shallow holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, hard plastic. Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). Drill holes with a twist drill before tapping. The tapping angle should be 90 degrees vertical and stable. Add appropriate tapping oil for higher quality internal threads and more durable taps.
Useful Tips: --- Control speed based on material hardness. Feed rate (recommended): ordinary steel (copper aluminium alloy): 6-15m/min; hard steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The higher the hardness, the slower the speed. Fast speed and low torque; slow speed and high torque. When tapping plastic, add lubricating coolant. For steel, motor oil is generally used, and vegetable oil is used for high requirements. Use No. 30 motor oil for stainless steel. ProductSiteLaunchDate : 2022-09-03T10:32:41.422Z Size : 1/4-28 UNF SpecificUsesForProduct : Machine Style : Straight Flutes SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1 UnspscCode : 31161500