Specification Brand : CoCud BulletPoint1 : ★ Thread Tap Size --- Thread size: M12 x 1.5 (right hand); square shank width: 7mm / 0.28"; thread length: 31.7mm / 1.25"; overall length: 88.1mm / 3.47"; accuracy: H2; flutes quantity: 4 flutes. BulletPoint2 : ★ Wide Application --- For threading through holes or shallow blind holes. 4 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic. BulletPoint3 : ★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. Straight flute taps are often used for machining short chip materials such as gray cast iron. Drill holes with a twist drill before tapping. Add appropriate tapping oil for higher quality internal threads and more durable taps. BulletPoint4 : ★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications. BulletPoint5 : ★ Useful Tips --- Machine tap is recommended for use with tap chucks with overload protection. Using a hand or electric drill can easily cause tap to break and is not recommended. Due to speed overload or non-vertical tapping, chipping or breakage may easily occur. ChamferType : Plug Color : Silver CuttingDirection : Right Hand ExternallyAssignedProductIdentifier : 8414740897325 ExternallyAssignedProductIdentifier1 : 0787309219219 ExternallyAssignedProductIdentifier2 : 787309219219 FinishType : Uncoated GpsrSafetyAttestation : 1 IncludedComponents : M3 M4 M5 M6 M8 M10 M12 Thread Tap Set ItemDisplayWeight : 0.43 ounces ItemName : CoCud Thread Milling Taps, Metric M12 x 1.5 Thread H2, High Speed Steel Machine 4 Straight Flutes Screw Threading Tool - (Applications: for Tapping Drilling Machine), 1-Piece ItemPackageDimensions_Height : 9.1 centimeters ItemPackageDimensions_Length : 1.6 centimeters ItemPackageDimensions_Width : 6.1 centimeters ItemPackageQuantity : 1 ItemShape : thread ItemShape1 : Round ItemShape2 : Cone ItemTypeKeyword : thread-milling-taps Manufacturer : CoCud Material : High Speed Steel MeasurementSystem : Metric ModelNumber : cuf220623dd0692 NumberOfPieces : 2 PartNumber : cuf220623dd0692 ProductDescription : Attributes: * Thread Size: M12 x 1.5 (Right Hand) * Square Shank Width: 7mm / 0.28" * Thread Length: 31.7mm / 1.25" * Overall Length: 88.1mm / 3.47" * Accuracy: H2 * Material: High Speed Steel (HSS) * Flutes Quantity: 4 Flutes
What Is Included: * 1 Piece x Thread Milling Taps
Applications & Features: --- Suitable for threading through holes or shallow holes. 4 straight flutes design, rapid downward chip removal. Straight flute taps are often used for machining short chip materials such as gray cast iron. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, hard plastic. Machine taps are used in tapping machines, vertical drilling and milling machines. --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). Drill holes with a twist drill before tapping. The tapping angle should be 90 degrees vertical and stable. Add appropriate tapping oil for higher quality internal threads and more durable taps.
Useful Tips: --- Control speed based on material hardness. Feed rate (recommended): ordinary steel (copper aluminium alloy): 6-15m/min; hard steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The higher the hardness, the slower the speed. Fast speed and low torque; slow speed and high torque. When tapping plastic, add lubricating coolant. For steel, motor oil is generally used, and vegetable oil is used for high requirements. Use No. 30 motor oil for stainless steel. ProductSiteLaunchDate : 2022-09-01T11:03:40.391Z Size : M12 x 1.5 SpecificUsesForProduct : Machine Style : Straight Flutes SupplierDeclaredDgHzRegulation : not_applicable SupplierDeclaredHasProductIdentifierExemption : 1 SurfaceRecommendation : Metal UnitCount : 7 UnspscCode : 31161500