Cart 2 india

Specification
Brand : Eagles
BulletPoint1 : 1. Full-grinding straight groove tap, fine threaded thread, precise thread, chip discharge into finely divided shape,easy to regrind, availability of through and blind holes
BulletPoint2 : 2. High-quality high-speed steel straight groove tap, high hardness, not easy to break, strong wear resistance, corrosion resistance, stable tapping performance, suitable for iron,cast iron, alloy steel, carbon steel, die steel, etc.
BulletPoint3 : 3. Using high-quality high-speed tool steel HSS, high cutting edge strength, good toughness, high wear resistance, excellent cutting performance and has long service life
BulletPoint4 : 4.14mm X1 metric HSS right-hand thread, sharp and durable, high processing efficiency, usually does not block the chip, wide range of applications, help you easily complete the drilling operation
BulletPoint5 : 5. When tapping the hole thread or the screw hole with deeper depth, the tapping safety chuck should be used to bear the cutting force. the cutting force of the safety chuck must be adjusted according to the size of the tap to avoid the cone or the attack
Color : M14 X 1
CuttingAngleString : 60.0 degrees
ExternallyAssignedProductIdentifier : 5056133333459
ExternallyAssignedProductIdentifier1 : 0705626190073
ExternallyAssignedProductIdentifier2 : 705626190073
GpsrSafetyAttestation : 1
IncludedComponents : Machine Tap
ItemName : Eagles 14mm X 1 Machine Straight Flute Taps,Straight Groove Full Grinding Machine Taps,High Speed Steel Straight Threading Taps
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : thread-milling-taps
Manufacturer : Eagles
Material : Steel
MeasurementSystem : Metric
MeasurementSystem1 : Metric
MeasurementSystem2 : Imperial
ModelNumber : M3.5 x 0.6mm
NumberOfItems : 1
PackageLevel : unit
PartNumber : QX9659-1
ProductDescription : Specification:
High speed steel hard straight trough tap /
wire tapping/14mm X1 metric HSS right hand thread
Quantity: 1pcs
Size: 14mm X0.1
Material: high quality 6542 high speed steel material
Full-grinding taps, grinding and manufacturing, high precision, smoother cutting
High cutting edge strength, sharp and durable, suitable for a wide range of cutting series,
difficult to process materials after heat treatment, such as aluminum alloy,
copper, zinc alloy, iron, cast iron, carbon steel, magnesium alloy,
titanium alloy, plastic, glass Fiber, bakelite, etc.

Thread operation mode:
When the tap is about to tap the thread, the feed should be light and slow
to prevent the tap front end from interfering with the depth of the threaded bottom hole of the workpiece.
The tap is damaged. When tapping the thread or the screw hole with a large depth,
the tapping safety chuck should be used. to withstand the cutting force,
the cutting force of the safety chuck must be adjusted
according to the size of the tap to avoid the cone or the attack
When the calibration part enters the workpiece, the natural thread of the reliable thread
is tapped to avoid cutting the tooth shape. when tapping the thread of the hole,
it should be noted that the calibration part of the tap cannot be fully exposed,
otherwise it will be disordered when the tap is reversed

Package include:
1 PC 14mm X 0.1 Metric HSS Right Hand Machine Tap
ProductSiteLaunchDate : 2019-07-04T07:00:00.000Z
Size : M5x53mm
Style : 261220E.
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111700