Cart 2 india

Specification
Brand : Neopaftu
BulletPoint1 : 【Size】 - M12 x 1mm Metric Tap and Die set
BulletPoint2 : 【High Quality】 - Made of high speed steel, wear-resistant, reliable, durable. Widely used in manual
BulletPoint3 : 【Feature】 - Full grinding thread, sharp and durable, tap automatic fine grinding process, clear thread, great for maintenance and repair work
BulletPoint4 : 【Application Range】 - Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc
BulletPoint5 : 【Package Include】 - 2pc M12 x 1 Metric TAP & 1pc M12 x 1 Metric DIE
IncludedComponents : Tap and Die Set
ItemName : Metric Hand Thread Tap and Die Set,Right Hand Thread Tapping Tool 3pcs (M12 x 1mm)
ItemPackageDimensions_Height : 0.71 inches
ItemPackageDimensions_Length : 5.9 inches
ItemPackageDimensions_Width : 5.1 inches
ItemTypeKeyword : thread-milling-taps
Manufacturer : Neopaftu
Material : M12 x 1mm
ModelName : Tap and Die Set
ModelNumber : TDSET
NumberOfBoxes : 1
ProductDescription : Due to oxidation, a little rust may appear. This will not affect normal use.
Tips:
1.Appropriate addition of coolant (e.g., water) can extend the service life when tapping.
2. The force must be uniform in tapping operations.
3. First drill the hole with twist drill, and then use the taps tapping. Tapping angle should be vertical 90 degree and keep stable.
4. Tapping depth should not exceed 1.5 times the diameter of the tap: For example: diameter of M6x1 about 6mm, the depth should not exceed 9mm.

ProductSiteLaunchDate : 2023-06-27T02:08:46.620Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27111700