Cart 2 india

Specification
Brand : Utoolmart
BulletPoint1 : 【Product Details】- Thread Size: M8*1mm. High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
BulletPoint2 : 【Surface Treatment】- Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
BulletPoint3 : 【Standard Designe】- Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading.
BulletPoint4 : 【Multiple uses】- Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping.
BulletPoint5 : 【Application】- The taper taps can be applied for threading machine and electric drills, use to cut thread inside hole, creating a female surface which functions like a nut.
Color : 2pcs
ExternallyAssignedProductIdentifier1 : 0886399767485
ExternallyAssignedProductIdentifier2 : 886399767485
FinishType : Titanium
ItemName : Utoolmart Metric Machine Taps, M8 x 1mm Pitch H2 Right Hand Thread Plug, HSS Uncoated, 4 Straight Flutes, Thread Tapping DIY Tool, 2pcs
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : thread-milling-taps
Manufacturer : Utoolmart
Material : High Speed Steel
MeasurementSystem : Inch
MeasurementSystem1 : Metric
MeasurementSystem2 : Imperial
ModelNumber : a19051000ux0688
OperationMode : Mechanical
PartNumber : UT190917L-1110
ProductDescription : Utoolmart Metric Machine Taps

Technical Parameters
* Product Name: Metric Machine Tap
* Color: Sliver
* Number of Flutes: 4
* Accuracy: H2
* Thread Size: M8
* Thread standard: Metric
* Material: HSS (High-Speed Steel)

Features
* Straight 4 flutes are ground to provide rapid chip removal for efficient threading.
* Used with some cutting fluid or keep it wet when tapping, the will last longer.
* The mini metric are mainly used for clocks, watches, low hardness wood and soft metal hole processing.
* Suit for machine use to cut thread inside hole, creating a female surface which functions like a nut.
* Taper offer a very gradual cutting action, is most often used when tapping material is difficult to work (e.g. alloy steel).

Tips
1. Recommended hardness of tapping material is not too high: Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping.
2. Please control speed according to material hardness. The higher the hardness, the slower the speed. Fast speed with small torque; slow speed with high torque. The force must be uniform in tapping operations.
3. First drill the hole with twist drill, and then use the taps tapping. Tapping angle should be vertical 90 degree and keep stable.
4. Tapping depth should not exceed 1.5 times the diameter of the tap: For example: diameter of M5x0.8 about 5mm, the depth should not exceed 7.5mm.

Package Contents
* 2 x Metric Machine Tap
ProductSiteLaunchDate : 2019-11-20T07:23:56.326Z
Size : M8×1
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 2
UnspscCode : 27111700