Cart 2 india

Specification
Brand : M & J Tooling LLC
BulletPoint1 : [100μm, 8H, 4mil, INDEX VALUE 10μm,1H, 0.4mil]---We have five kinds of double groove grindometer: 0-25μm, 0-50μm, 0-100μm, 0-150μm, 0-300μm. Double groove fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove, the accuracy of fineness plate grooves is ±1.
BulletPoint2 : [USING AND READING]--Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. When particles begin to appear discontinuous, the first discontinuous point value is the fineness value.
BulletPoint3 : [READING UNIT: μm,H,mil]--Correspondence between micron and hegman as follows: 0 hegman=100 μm,4mil; 4 hegman=50 μm, 2mil, 8 hegman=0 μm,0mil, 1mil=25.4μm, 1μm=0.001mm
BulletPoint4 : [HOW TO CHOOSE GRINDOMETER]--Choose a fineness gauge 5-10um higher than the product fineness range you measured. Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
BulletPoint5 : [NOT ONLY FOR PAINT]--Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on. In chocolate, ceramics, paper, medicine, food and other industries, it is also possible to use single groove grinding fineness design for fineness detection.
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0531622852376
ExternallyAssignedProductIdentifier2 : 531622852376
ExternallyAssignedProductIdentifier3 : 00603908192466
IncludedComponents : Product & Instructions Guide
ItemDepth : 1.30 inches
ItemName : New M18 X 1.25 6g Solid Thread Ring GAGES 18 GO NO GO P.D.'S = 17.160 & 17.028 - DW33621MSAF
ItemPackageDimensions_Height : 8.89 centimeters
ItemPackageDimensions_Length : 36.322 centimeters
ItemPackageDimensions_Width : 22.352 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : thread-gauges
Manufacturer : M & J Tooling LLC
Material : metal
MeasurementAccuracy : +/-0.1 mm
ModelNumber : M-7
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : DW33621MSAF
ProductDescription : YOU ARE PURCHASING THE PICTURED RIGHT HANDSOLID THREAD RINGGAGES.


SOLD BY M & J TOOLING LLC
DAYTON, OHIO


PRODUCT SPECIFICATIONS AND / OR LABELING:


CONDITION:
NEW


SIZE:
M18 X 1.25 6g SOLID


GO P.D.:
17.160


NO GO P.D.:
17.028


MANUFACTURER / BRAND:
M & J TOOLING LLC




THANK YOU FOR YOUR BUSINESS!


LOCATION: WB9-3-4-11

ProductSiteLaunchDate : 2025-03-11T13:36:30.519Z
Range : .04-12 inches
Size : 5.9" H x 1.30" D x 2.91" W
Style : 0.04-12" Measuring Range
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 39121400