Cart 2 india

Specification
AgeRangeDescription : All
Brand : QWERTYUILLL
BulletPoint1 : Thread Checker & Drill Bit Gauge: Quickly identify up to 34 different sizes of bolts & nuts, covers the most common 19 standard (from 6-32 Coarse to 3/4-10 Coarse) and 15 metric (from 4mmx0.7 to 16mmx2.0) thread sizes. There are also 8 drill bit gauges to identify the size of common bits(from 4mm to 14mm, 1/4in, 1/2in).
BulletPoint2 : Friendly design: For large nuts, our thread checker widen the spacing between bolts. Four corners are rounded and the included hanging holes make it easy to hang and carry. There are non-slip pads on the back that can be unscrewed and hung to the wall.
BulletPoint3 : Made of All Metal: The screws are made of stainless steel and the board is made of lightweight aluminum for long-term use. The solid back plate is up to 0.2 in/5 mm thick.
BulletPoint4 : Easy to Use: The surface features clear and easy-to-read metric and imperial measurements laser-etched, and length scales (15cm and 6 inches) on both sides make it easy to quickly measure nut/drill bit lengths.
BulletPoint5 : All-in-one Design: All accessories are neatly fastened to a solid aluminum plate, ensuring that you can use it quickly and orderly every time, avoiding the hassle of confusion and loss.
BulletPoint6 : Note: 1. When testing nuts or bolts, please do not use excessive force to avoid damaging the threads due to incorrect. 2. Since the feet are pre-installed, if you need to hang it on the wall, please unscrew the feet first.
Color : Deep Red
ControlMethod : remote
EarpieceShape : over-ear cups
ExternallyAssignedProductIdentifier : 10726597545577
ExternallyAssignedProductIdentifier1 : 844788054486
ExternallyAssignedProductIdentifier2 : 0844788054486
ExternallyAssignedProductIdentifier3 : 00844788054486
GpsrSafetyAttestation : 1
IncludedComponents : User Manual
ItemName : Thread Detective/Thread Identifier Mini Metric and SAE/Inch Set
ItemPackageDimensions_Height : 8.5 inches
ItemPackageDimensions_Length : 5 inches
ItemPackageDimensions_Width : 1.2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : thread-gauges
Manufacturer : Innovative Components
Material : Aluminum, Steel
MeasurementAccuracy : 0.1mm & 1/16in
ModelNumber : 844788054486
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : TD Mini Set
ProductDescription : The Thread Detective is a precise and easy-to-use thread identifier for both nuts and bolts, consisting of gliding gauges conveniently assembled onto a wire lanyard. It is especially well suited for distinguishing between similar inch and metric threads. Our unique Thread Identifiers (aka thread checkers) are available in Metric, English Standard, and a combo of Metric and English Standard. For your convenience we provide extra-long wire rope for those hard to reach places, as well as loops on each end for convenient hanging. Inch Thread Identifiers contain nut and bolt sizes of 1-64, 1-72, 2-56, 2-64, 3-48, 3-56, 4-40, 4-48, 5-40Metric Thread Identifiers contain nut and bolt sizes of M1.2x0.25, M1.6x0.35, M1.6x0.20, M1.8x0.35, M2.0x0.40, M2.0x0.40, M2.0x0.25, M2.5x0.45, M2.5x0.35, M3.0x0.50, M3.0x0.35, M3.5x0.60, M3.5x0.35.
ProductSiteLaunchDate : 2016-11-11T05:49:59.963Z
Size : Large
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 52161514