Cart 2 india

Specification
Brand : KUNWU
BulletPoint : CS310-25W
BulletPoint1 : Low carbon (0.03 % maximum) in this filler metal reduces the possibility of intergranular chromium carbide precipitation and thereby increases the resistance to intergranular corrosion without the use of stabilizers such as niobium or titanium
BulletPoint2 : The 2.5 % molybdenum content of 316L gives the weld deposit excellent corrosion resistance at elevated temperatures against “pitting” that may be caused by sulfuric, phosphoric and acetic acids
BulletPoint3 : ER316L is usually used to 18% chromium – 12% nickel – 2.5% molybdenum austenitic stainless steels such as 316 and 317 but with a low ferrite, it can also be used for welding 304/304L to 316/316L stainless steels in cryogenic service at temperatures down to -452 ℉ (-269 ℃)
BulletPoint4 : Primarily used for welding low-carbon molybdenum-bearing austenitic alloys. Common applications include equipment that manufacturers rayon, dye, paper, ink, rubber, bleach, photographic chemicals and on the sealing faces of valves and fittings for acid, gas, water and steam equipment
BulletPoint5 : Welding Positions: All Positions
Color : 5 Lb
ExternallyAssignedProductIdentifier1 : 608201125524
ExternallyAssignedProductIdentifier2 : 0608201125524
IncludedComponents1 : inc
IncludedComponents2 : inc
IncludedComponents3 : inc
IncludedComponents4 : inc
IncludedComponents5 : inc
ItemDisplayDimensions_Length : 36 inches
ItemDisplayWeight : 5 pounds
ItemName : ER316L Stainless Steel TIG Welding Rods 3/32" x 36" Pack-5 Lb
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 37 inches
ItemPackageDimensions_Width : 3 inches
ItemPackageQuantity : 1
ItemShape : Straight
ItemTypeKeyword : tig-welding-equipment
Manufacturer : Kunwu Advanced Materials
Material : Stainless Steel
Material1 : Material
Material2 : Material
Material3 : Material
Material4 : Material
Material5 : Material
Material6 : Material
Material7 : Material
ModelName : 332-7G
ModelNumber : 332-7G
NumberOfItems : 10
PartNumber : ER316L-2.4-5LB
PowerSourceType : PowerSource
ProductDescription : ER316L. This classification is the same as ER316, except for the carbon content. Low carbon (0.03 percent maximum) in this filler metal reduces the possibility of intergranular chromium carbide precipitation and thereby increases the resistance to intergranular corrosion without the use of stabilizers such as niobium or titanium. The 2.5 percent molybdenum content of 316L gives the weld deposit excellent corrosion resistance at elevated temperatures against “pitting” that may be caused by sulfuric, phosphoric and acetic acids. This filler metal is primarily used for welding low-carbon molybdenum-bearing austenitic alloys. This low-carbon alloy, however, is not as strong at elevated temperature as the niobium-stabilized alloys or Type ER316H.
ProductSiteLaunchDate : 2022-02-28T15:23:40.744Z
Size : 3/32"
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 80