Cart 2 india

Specification
Brand : HYW Products
BulletPoint : ER70S-2 1/16" - 3/32" - 1/8" X 36" Tig Welding Wire rod 10 lb
BulletPoint1 : 【GENERAL TUNGSTEN ELECTRODE SHARPENING MACHINE】: TIG Welding Tungsten Grinder Set, professional Tungsten Sharpener Multi-Angle Offsets Tool. They can fit all most electric Rotary Tools, diameter of 3/4-12 thread(18mm), most are compatible with Milwaukee, Dremel, Black and Decker Etc.
BulletPoint2 : 【ANGLE OFFSET DESIGN】: Heavy-duty Sharpener Multi-Angle Off Set is made of aluminum, anti-corrosion,anti-rust, the surface is treated with black matte, smooth and durable. The size of each hole with angular offset compensation to ensure that the grinding surface of the tungsten needle is in contact with the diamond grinding wheel, and the tool tip is at the grinding center point, so that the ground tip is as straight as possible. Make sure you can buy with confidence and use it.
BulletPoint3 : 【EASY TO INSTALL】: All the ALUMINUM Tungsten Electrode Sharpener Grinder Head Kits included- Tungsten electrode angle Controller, Connecting Rod, Diamond Wheel, Installation Instructions. (No Rotary Tool).Please read the accompanying instructions carefully. You can use it multiple times, and don't disassemble and install it multiple times. You can grind tungsten needles with multiple angles under the diamond wheel of the same height, saving you time.
BulletPoint4 : 【PERSONALIZED DESIGN】: We have designed three hole sizes for you, namely 1/16" ，1/8" and 3/32" tungsten needles. 9-hole design, You can grind on tips of 15° ,20° and 30°. Reduce the consumption of diamond grinding discs, you can grind any angle you want. Satisfy your needs.
Color : Black
ExternallyAssignedProductIdentifier1 : 0600137573219
ExternallyAssignedProductIdentifier2 : 600137573219
ItemName : ER70S-2 1/16" - 3/32" - 1/8" X 36" Tig Welding Wire rod 10 lb (1/16")
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 37 inches
ItemPackageDimensions_Width : 6 inches
ItemTypeKeyword : tig-welding-equipment
Manufacturer : HYWELD
Material : Metal
ModelNumber : KAYBOBEZK
PartNumber : ER70S211633218TIG
ProductDescription : 10 lbs in a plastic container ER70s-2 TIG AWS A5.18 ER70S-2 ASME SFA 5.18 ER70S-2 ER70S-2 is a multiple deoxidized wire containing small amounts of zirconium, titanium and aluminum in addition to the manganese and silicon deoxidizers characteristic of the steel wire group. This wire may be used for MIG or TIG welding on all grades of mild and carbon steels, producing superior quality welds with minimal porosity even over rust and mill scale. ER70S-2 is popular for out of position welding with small diameter wires utilizing the short-circuiting arc type transfer. MIG welding may he accomplished using CO2, Argon-Oxygen mixtures or mixtures of the two. Applications: Pipes, offshore drilling rigs, structural steel work, etc. TYPICAL WIRE CHEMISTRY (%) - ER70S-2 AWS Spec C 0.050 0.07 max. Mn 1.250 0.90-1.40 Si 0.500 0.40-0.70 P 0.012 0.025 max S 0.012 0.035 max Al 0.100 0.05-0.15 Zr 0.090 0.02-0.12 Ti 0.100 0.05-0.15 Typical mechanical properties of weld metal (C02 shielding gas) - AWS Spec ER70S-2 Yield strength (psi) 60,000 min 71,000 Ultimate tensile strength (psi) 72,000 min 83,000 Elongation in 2" (%) 22 min 27.5 Charpy V-notch at 0 F (ft. lbs) 20 min 30 Reduction of area - 58 Average Brinell Hardness - 140
ProductSiteLaunchDate : 2017-09-13T21:00:00.000Z
Size : 1/16"
UnspscCode : 23271800