Cart 2 india

Specification
Brand : S STAHLWERK
BulletPoint1 : AC/DC PULSE TIG WELDER: AC TIG welding is used to finely weld a variety of aluminum alloys, magnesium alloys and other non-ferrous metals. DC TIG welding provides low temperature control. Excellent performance on Aluminum, stainless steel and thinner metals.
BulletPoint2 : 6-IN-1 TIG WELDER AC/DC: ARC, AC TIG, DC TIG, AC Pulse TIG, DC Pulse TIG, Spot Welding in one multi-functional welding machine, meet your various welding needs.
BulletPoint3 : SELF-PROTECT: Over-current, over-heat, when the mentioned problems occoured, the alarm lamp on the front panel will be on and the output current will be cut off. It can self-protect and prolong the using life.
BulletPoint4 : HIGH PERFORMANCE: MCU control system, responds immediately to any changes.
BulletPoint5 : FUNCTIONAL: High frequency and high voltage for arc igniting to ensure the success ratio of igniting arc, the reverse polarity ignition ensures good ignition behavior in TIG-AC welding.
ExternallyAssignedProductIdentifier1 : 715538722859
ExternallyAssignedProductIdentifier2 : 0715538722859
ExternallyAssignedProductIdentifier3 : 00840338539816
FinishType : Finish
IncludedComponents : inc
ItemDisplayDimensions_Height : 3 inches
ItemDisplayDimensions_Length : 15 inches
ItemDisplayDimensions_Width : 12 inches
ItemDisplayWeight : 4 pounds
ItemName : S STAHLWERK TIG Welder 200A AC DC Pulse Aluminum Full Digital Control 110V/220V Dual Voltage Welding Machine
ItemPackageDimensions_Height : 54.61 centimeters
ItemPackageDimensions_Length : 27.94 centimeters
ItemPackageDimensions_Width : 38.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : tig-welding-equipment
Manufacturer : S STAHLWERK
Material : TIG
ModelNumber : Wal fronts6bh7eioqu
PartNumber : CP-0801006US
PowerSourceType : unknow
ProductDescription : WT 242P AC/DC welding machines adopts the latest pulse width modulation (PWM) technology and insulated gate bipolar transistor (IGBT) power module, which can change work frequency to medium frequency so as to replace the traditional hulking ork frequency transformer with the cabinet medium frequency transformer. Thus, its characterized with portable, small size, light weight, low consumption and etc. The parameters of on the front panel all can be adjusted continuously and steplessly, such as start current, crater arc current, welding current, base current, duty ratio, upslope igniting to ensure the success ratio of igniting arc.

WT 242P AC/DC machines Characteristics:
MCU control system, responds immediately to any changes.
High frequency and high voltage for arc igniting to ensure the success ratio of igniting arc, the reverse polarity ignition ensures good ignition behavior in TIG-AC welding.
AvoidAC arc-break with special means, even if arc-break occurs the HF will keepthe arc stable.
Pedal control the welding current.
In DC TIG without HFopertation, If the tungsten electrode touches the workpiece when welding, the current will drop to short-circuit current to protect tungsten.
Intelligent protection: over-current, over-heat, when the mentioned problems occoured,the alarm lamp on the front panel will be on and the output current will be cut off. It can self-protect and prolong the using life.
ouble purposes: AC inverter TIG and DC inverter TIG/MMA, Excellent performance on AL-alloy, carbon steel, stainless steel, titanium.

PACK LIST: WT 242P AC/DC welder, TIG Torch WP-26 4m & accessories kit, 300 Amp Earth Clamp With 3m cable, 2m Gas Hose 5x8, welder power converter,operating Manual.
ProductSiteLaunchDate : 2021-11-22T06:49:28.596Z
Size : 250 Amp - 12.5 Feet - Flexible Head
SupplierDeclaredDgHzRegulation : not_applicable