Cart 2 india

Specification
Brand : SYSTEMTHREE
BulletPoint1 : Liquid Colorants: CastFX liquid epoxy resin color pigments are designed to work specifically with RiverCast and MirrorCast epoxies; Create a river table, fill knots and cracks for eye catching color contrasts or use for resin art application
BulletPoint2 : Measure & Mixing: Combine the Resin with the Hardener, mix thoroughly according to the RiverCast or MirrorCast directions, add CastFX Liquid Colorant epoxy dyes, then mix until the color is uniformly blended with the casting resin
BulletPoint3 : Mix & Match: CastFX Liquid Epoxy Colorants and CastFX Dry Color Pigments can be used together to create stunning, one of a kind effects
BulletPoint4 : Unique Color Blend: Liquid Colorants can be intermixed with one another to create your own unique color blend; Add a little for a transparent effect or up to 4 ounces per mixed gallon for complete opacity
BulletPoint5 : Clean Up: CastFX Liquid Colorants can be cleaned up with lacquer thinner, denatured alcohol, or white vinegar
Color : Crescent Black
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Stone
ExternallyAssignedProductIdentifier1 : 0646697004015
ExternallyAssignedProductIdentifier2 : 646697004015
ItemForm : Liquid
ItemName : System Three CastFX Liquid Colorant Resin Dye, Crescent Black, 4oz
ItemPackageDimensions_Height : 1.75 inches
ItemPackageDimensions_Length : 8.7 inches
ItemPackageDimensions_Width : 3.95 inches
ItemPackageQuantity : 1
ItemTypeKeyword : tile-epoxy-adhesives
ItemVolume : 3 cubic_centimeters
Manufacturer : FillaChip
Material : Composite
ModelNumber : 0581S06
ProductDescription :

FillaChip Single Color Kit For Stone Chip Repair
The FillaChip Single Color Kit is an excellent chip repair kit made for a one-time use. In this kit you get one 3cc syringe of the FillaChip which is pre-colored and two tips – all that you need for filling your chip that color. If you have a complete FillaChip kit you can use this with it – fill the chip with the pre-colored glue, use the clear plastic sheet to press it flat, put the UV light on it and allow it to cure. Once cured you use a razor blade to scrape it flush with the stone. You can even store these syringes and tips in your FillaChip case. If you do not have a FillaChip kit you can still use this, here is how:
Fill the chip and use a flat piece of plastic to make the glue flat (a plastic playing card, a piece of film, even the back of an old photo). Once flattened out, if you have a UV light shine it on the repair for 20 – 30 seconds to cure the glue. If you do not, allow natural UV light to harden the glue (time may vary). Once the glue is hard, scrape it flush with the stone using a single edge razor blade. After that, apply some polish and buff it with a soft cloth until the repair is shiny and matches the stone.
ProductSiteLaunchDate : 2021-01-13T19:07:12.926Z
Size : 4 Ounce
SpecificUsesForProduct1 : Tile Repair
SpecificUsesForProduct2 : Repair
SpecificUsesForProduct3 : Masonry
UnitCount : 1
UnspscCode : 31211500
Viscosity : Low to Medium Viscosity
WaterResistanceLevel : not_water_resistant