Cart 2 india

Specification
Brand : Venom Carbon
BulletPoint1 : Medium Infusion Epoxy is a two-component, very low viscosity system developed specifically for use in resin infusion and VARTM processes.
BulletPoint2 : Medium Infusion Epoxy was formulated to provide for rapid saturation of carbon fiber laminate, fiberglass, and Kevlar.
BulletPoint3 : Processability parameters are enhanced due to Medium Infusion Epoxy’s low mixed viscosity and wet-out potential.
BulletPoint4 : This system is not designed to be used in open mold applications.
BulletPoint5 : High quality service: We are committed to providing high-quality service to ensure customer satisfaction. Before using casting resin epoxy, please carefully read the instructions. If you have any questions during use, please feel free to contact us. We will reply to you within 24 hours and provide assistance.
Color : Clear
CompatibleMaterial : Ceramic
CompatibleMaterial1 : Fiberglass
CompatibleMaterial2 : Carbon
ContainsLiquidContents : 1
ExternallyAssignedProductIdentifier1 : 779008834275
ExternallyAssignedProductIdentifier2 : 779008834268
ExternallyAssignedProductIdentifier3 : 0779008834275
ExternallyAssignedProductIdentifier4 : 0779008834268
ExternallyAssignedProductIdentifier5 : 00779008834268
FcShelfLife : 365 days
Hazmat1 : AMINES, LIQUID, CORROSIVE, N.O.S., (Cycloaliphatic amine, 2-Methypentamethylenediamine)
Hazmat10 : EG_NoAir
Hazmat11 : ES_NoAir
Hazmat12 : FR_NoAir
Hazmat13 : GB_NoAir
Hazmat14 : IN_GroundOnly
Hazmat15 : IT_NoAir
Hazmat16 : JP_GroundOnly
Hazmat17 : MX_NoAir
Hazmat18 : NL_NoAir
Hazmat19 : PL_NoAir
Hazmat2 : UN2735
Hazmat20 : SA_NoAir
Hazmat21 : SE_NoAir
Hazmat22 : SG_NoAir
Hazmat23 : TR_NoAir
Hazmat24 : US_NoAir
Hazmat25 : ZA_NoAir
Hazmat26 : 9
Hazmat3 : II
Hazmat4 : 8
Hazmat5 : BE_NoAir
Hazmat6 : BR_NoAir
Hazmat7 : CA_NoAir
Hazmat8 : CN_GroundOnly
Hazmat9 : DE_NoAir
IncludedComponents : 1 container part A ^ 1 container Part B
ItemForm : Liquid
ItemName : Vacuum Infusion Resin Medium Cure (1 gallon kit)
ItemPackageDimensions_Height : 20.8026 centimeters
ItemPackageDimensions_Length : 7.2898 centimeters
ItemPackageDimensions_Width : 19.4056 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : tile-epoxy-adhesives
ItemVolume : 1 gallons
LiquidVolume : 32 fluid_ounces
Manufacturer : VC
Material : Carbon Fiber,Resin
ModelNumber : RR-ER-32OZ(kit)
NumberOfItems : 2
PartNumber : VCMVIR1G
ProductDescription :

STORAGE INFORMATION

The storage temperature of Medium Infusion Epoxy will greatly affect the ease of mixing, application and, curing time. For best results, Medium Infusion Epoxy should be stored at (60-80 °F or 16-27 °C) for at least 24 hours before use.

MIXING INFORMATION

Mix RESIN WITH (hardener) for 3 minutes using a Jiffy Mixer and a slow speed drill. Mix at slow speed (less than 500 rpm) to avoid air entrainment. When adding part B to part A, be sure to scrape the sides of the hardener (part B) container in order to remove all of the hardener. This is essential to maintain proper mix ratio. DO NOT mix more material than can be used within the stated working time. REMEMBER - you will have less working time at higher temperatures.

Crystallization of epoxy resin is not an uncommon occurrence; in some cases, it is simply a reflection of the high-performance nature of the material. Under the perfect conditions, usually extreme temperature change, any epoxy resin can crystalize. The crystallization may present itself as the resin becoming cloudy all the way to the resin turning to a solid.

Follow the following steps to restore a crystallized epoxy resin to its normal state:

1)Place resin container in warm water until the resin reaches approximately 120-degrees Fahrenheit. (An easy way to achieve this with normal household products is a slow cooker)

2)Keep epoxy resin at this temperature for several hours. Mixing may be needed while warm to dissolve all crystals.

3)Allow the epoxy resin to cool back down to room temperature before use. The resin being warm can drastically change working times.

4)Feel free to use this epoxy resin just as you normally would.

ProductSiteLaunchDate : 2021-12-23T16:36:26.740Z
SafetyDataSheetUrl : http://www.mgchemicals.com/downloads/msds/english/sds-834ath-part-a.pdf
Size : RR-ER-32OZ(kit)
SpecificUsesForProduct : Table Top Coating, Countertop, Industrial Applications, Surface Protection, Woodworking, Repair, Flooring, Wall Repair
SpecificUsesForProduct1 : Art
SpecificUsesForProduct2 : Craft
SpecificUsesForProduct3 : Jewelry
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
TensileStrength : 4100 pounds_per_square_inch
UnitCount : 128
WaterResistanceLevel : water_resistant