Cart 2 india

Specification
Brand : Taidacent
BulletPoint1 : Switching voltage: less than 6V
BulletPoint2 : Switching current: less than 20mA
BulletPoint3 : Closed circuit resistance: less than 10 ohms
BulletPoint4 : Open circuit resistance: greater than 10M ohms
BulletPoint5 : Terminal tension: 500gf/sec
Color : 10 Degree
ConnectivityProtocol : X-10
ConnectorType : Solder
CurrentRating : 20 milliamps
ExternallyAssignedProductIdentifier1 : 0792323453372
ExternallyAssignedProductIdentifier2 : 792323453372
InternationalProtectionRating : IP54
ItemName : Taidacent 10 Pcs Omnidirectional Ball Tilt Switch Rolling Ball Tilt Switch Anti-Back Roll Ball Tilt Sensor Switches (Curved Pin, 10 Degree)
ItemTypeKeyword : electronic-component-tilt-sensors
Manufacturer : Taida
Material : Metal
ModelNumber : ZC-BL-108Lswitch-0120
MountingType : Surface Mount
NumberOfPositions : 10
OperatingVoltage : 6 volts
OperationMode : ON-OFF
PartNumber : ZC-BL-108Lswitch-0120
ProductDescription : How to choose it
H: Double pin type; suitable for horizontal PCB board installation
L: Angled pin type; suitable for vertical PCB board installation
XH: Solder pin type; suitable for horizontal upside-down installation
Straight legs
Supply three suitable horizontal mounting PCB boards for use
Available angles: 15, 30, 45, 60, 80 degrees
Curved foot type
Supply two suitable vertical mounting PCB boards for use
Available angles: 15, 30, 45, 60, 80 degrees
Solder foot type
Supply two suitable water-installed flip-chip PCB boards for use
Available angles: 25, 45, 80 degrees.

Instruction
1. Ball tilt switch
2. This series of switches are tilt switches in all directions with a 360-degree radius.
3. The switch function is ON/OFF tilt conversion, when the switch is at rest, it is non-conducting 0FF state, and the tilt reaches the switch
The inclination angle itself requires the switch from the non-conducting OFF state to the conducting ON state. When returning to the horizontal position, the switch will not conduct 0FF state.
4. Available: 15°/20°/30°/45°/60°/80°
5. Supply a variety of different mounting type PCB boards. (Horizontal PCB/Vertical PCB/Horizontal flip-chip PCB)
Parameters
Switching voltage: less than 6V
Switching current: less than 20mA
Closed circuit resistance: less than 10 ohms
Open circuit resistance: greater than 10M ohms
Terminal tension: 500gf/sec
Working temperature: minus 25 to plus 75 degrees
Function parameters
Switch shell: metal shell type
Switch function: ON/0FF
Trigger function: tilt trigger switch
Trigger direction: 360 lower radius all directions tilt type
Installation requirements: horizontal installation / vertical installation / horizontal inversion
Switch life: 200,000 times of normal use

ProductSiteLaunchDate : 2021-01-21T02:18:54.974Z
Size : Curved Pin
SwitchType1 : Tilt Switch
SwitchType2 : Temperature Switch
TerminalType : Pin,solder
UnspscCode : 39122200