Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
Brand : Ballmers
BulletPoint1 : 【OE Part Number】EN-52461, EN-52476, EN-52462, EN-52462-A
BulletPoint2 : 【Application】For Cadillac XT4 (2019+) 2.0LT LSY, for Buick Envision 2.0 LSY, compatible with 2019+ (Silverado, Sierra 2.7LT L3B), for Chevy Silverado 2.0LT (RPO LSY) engine. Note: EN-52461-100 50T adapter, suitable for Cadillac XT4 (2019+) equipped with 2.0LT LSY engine; only suitable for Silverado and Sierra 2019 equipped with 2.7LT L3B engine.
BulletPoint3 : 【High Quality】The Timing Tool Kit can effectively reduce the leakage between the piston and the cylinder block, providing better sealing, thereby improving the compression efficiency and power output of the engine. Made of high-quality steel, which is corrosion-resistant and wear-resistant. It has good rigidity and durability, can withstand large forces, is not easy to break, and ensures stability during use. At the same time, it is equipped with a special storage box for easier storage and movement.
BulletPoint4 : 【Easy to Use】 Enhance your engine maintenance with our Engine Timing Belt Tools that allow you to effortlessly lock/correct the camshaft and crankshaft timing position, ensuring a smooth operation. These tools also assist in securely locking the camshaft, aiding in the removal of the variable valve timing pulley, and providing a hassle-free experience.
BulletPoint5 : 【Worry-free Return and Refund Policy】 We stand behind the quality of our product with a worry-free return and refund policy. If you have any questions, please contact us with the frame number, and we will provide you with the most correct advice. Buy with confidence!
CompatibilityOptions1 : for Cadillac XT4 (2019+) 2.0LT LSY; for 2019+ (Silverado, Sierra 2.7LT L3B)
CompatibilityOptions2 : for Buick Envision 2.0 LSY
CompatibilityOptions3 : for Chevy Silverado 2.0LT (RPO LSY) engine
FitType : Universal
IncludedComponents : NO
IncludedComponents1 : EN-52462-A Camshaft Alignment Tool
IncludedComponents2 : EN-52476 flywheel locking and alignment tool
IncludedComponents3 : EN-52461 camshaft torque reaction tool
ItemName : Ballmers EN-52461 EN-52476 EN-52462 Engine Camshaft Timing Tool Kit Compatible with Buick Envision Cadillac XT4 2.0LT LSY and Chevy Silverado 2.7L L3B 2.0L LSY Engine
ItemPackageDimensions_Height : 40.4114 centimeters
ItemPackageDimensions_Length : 12.3952 centimeters
ItemPackageDimensions_Width : 35.4076 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-timing-belt-tools
Manufacturer : Ballmers
Material : Metal
ModelName : EN-52461-Engine Camshaft Timing Tool Kit
ModelNumber : EN-52461
NumberOfBoxes : 1
NumberOfItems : 1
OeManufacturer : EN-52461, EN-52476, EN-52462.
OemEquivalentPartNumber : EN-52461, EN-52476, EN-52462.
PartNumber : EN-52461
PartTypeId : EN-52461, EN-52476, EN-52462
ProductDescription :

How to use the kit：

Once EN-52462-A is seated on the cam cover or carrier, the handles are turned towards the rear of the engine, away from the actuators, to center the cams in the correct timed position. The actuators can then be installed and tightened using EN-52461, with either EN‑52461-100 (2.0LT LSY) or EN-52461-200 (2.7L‑T L3B). Unapproved methods will result in incorrect timing and can lead to engine damage.

EN-52476 Flywheel Lock and Alignment Tool

EN-52476 installs in place of the starter and ensures that the flywheel is in the timed position for timing chain service. It also locks the flywheel ring gear teeth to allow flywheel bolt, balancer bolt, and camshaft actuator installation and torqueing. Once the body of EN‑52476 is installed in place of the starter, the flywheel is turned until the spring-loaded lock pin engages into the timing hole in the flywheel.

Once the timing service is completed, the lock pin is pulled back and turned ¼ turn to hold it in the retracted position. At this point, the locking tooth can be engaged into the ring gear and tightened to hold the ring gear for torqueing the required fastener(s). There are two ends on the locking tooth, to fit multiple engines and future applications.

Note: The timing pin MUST be retracted before torqueing any fasteners. Torqueing fasteners with the timing pin engaged in the flywheel timing hole will damage the timing pin on EN-52476.

EN-52461 Camshaft Torque Reaction Tool

When camshaft timing or actuator service is required, the actuators must be held in order to remove and install the oil control valves (OCV), which act as fasteners to attach the camshaft actuators to the camshafts. EN-52461 ensures the actuators are held in the timed position for OCV service, and are used to remove all slack from the timing chain prior to timing chain, actuator, or camshaft service. EN-52461 is used with the engine-appropriate adapter set (EN-52461-100 for 2.0LT LSY or EN-52461-200 for 2.7LT

ProductSiteLaunchDate : 2023-09-15T02:57:45.398Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 25170000
WarrantyDescription : 1 Year