Cart 2 india

Specification
Brand : Jason Industrial
BulletPoint1 : Consistent dimensional stability
BulletPoint2 : High abrasion resistance
BulletPoint3 : High flexibility
BulletPoint4 : High resistance to oils, fats and greases
BulletPoint5 : Static conductive
Color : Black
CustomerPackageType : Frustration-Free Packaging
ExteriorFinish : Painted
ExternallyAssignedProductIdentifier1 : 035373145911
ExternallyAssignedProductIdentifier2 : 0035373145911
ExternallyAssignedProductIdentifier3 : 4047643339520
ExternallyAssignedProductIdentifier4 : 04047643339520
ExternallyAssignedProductIdentifier5 : 00035373145911
FitType : Universal Fit
IncludedComponents : Megapower Polyurethane Endless Timing Belt
ItemName : Jason Industrial 6T5/525 T-5 Metric Pitch Timing Belts, Polyurethane, 6 mm Wide, 525 mm Pitch Length, 105 Teeth
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 14 inches
ItemPackageDimensions_Width : 15 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-timing-belts
Manufacturer : Jason Industrial
Material : Polyurethane
ModelName : 2600-8M-20
ModelNumber : 6T5/525
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 6T5/525
ProductDescription : DescriptionsV-belts are the most common type of drive belt used for power transmission. The V-shaped ribs increase the contact area between the belt and pulleys, they provide the best combination of traction, speed transfer, load distribution, and extended service life.
The multi-rib belt offers the flexibility of a flat belt while delivering the high power transmission performance of a traditional V-belt.
Made of nitrile butadiene rubber material, high-temperature resistance, oil resistance, wear resistance, and high coefficient of friction.
Fit for many industrial machinery, appliances, and power tools, such as small compressors, pumps, drills, and saws.
Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys and shaft too great.
How to measure the length of the required belt?Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

ProductSiteLaunchDate : 2012-11-19T21:55:03.444Z
Size : 35 inches
SpecificationMet : Iso
StreetDate : 2017-11-25T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111800
WarrantyDescription : Limited 1 Year Warranty