Cart 2 india

Specification
Brand : Shars
BulletPoint1 : MFG SKU #: 404-6819W+202-6931
BulletPoint10 : Max. RPM Balanced to: G2.5 20000
BulletPoint2 : Brand: Shars Tool
BulletPoint3 : Cutting Diameter: 1-1/4
BulletPoint4 : Axial Depth of Cut AP: 0.63
BulletPoint5 : Thread Pitch: M16 x 2.0
BulletPoint6 : Pilot Diameter: 17mm
BulletPoint7 : Projection Length: (404-6819W: 1.97), (202-6931: 2")
BulletPoint8 : Nose Diameter: 1.22"
BulletPoint9 : TIR (Inch): 0.0001"
ExternallyAssignedProductIdentifier1 : 0000540468193
ExternallyAssignedProductIdentifier2 : 000540468193
IncludedComponents : 1 Indexable End Mill, 1 Thread Tool Holder, Insert NOT included
ItemName : BT30 M16x2.0 2" End Mill 1-1/4" Modular 90° Indexable End Mill APKT 1604 404-6819W+202-6931 P[
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 11 inches
ItemPackageDimensions_Width : 7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : tool-holders
Manufacturer : Shars Tool
ModelNumber : 404-6819W+202-6931
NumberOfBoxes : 1
NumberOfItems : 2
PackageLevel : unit
PartNumber : 404-6819W+202-6931
ProductDescription :

• Modular milling cutter head is able to cover variety of milling operation in die and mold manufacturing, automobile manufacturing, energy and wind power, and aerospace industry
• Reduce inventory by only replacing cutter heads and not shank, other style of cutter body with different insert is also available
• Feature precision ground surface on the locating shoulder and pilot outside diameter to ensure rigid contact with the threaded tool holder
• Indexable cutter head threads into the tool holder by means of a right hand thread, any cutting force would only increase the bond between tool holder and cutter head
• Reduces vibration on long overhang applications
• Chip thinning effect allows for increased table feeds
• High Positive cutting geometry
• Fitted with 10 degree positive rectangular inserts allow high depth of cut and feed per tooth
• Use APKT / APHT / APET / APMT 1604 insert (sold separately)
• Setting Angle: 90 degree
• Radial rake angle: -10 degree
• Axial rake angle: 7 degree

• Tool holder is balanced to G2.5 20,000 RPM on a HAIMER Tool Dynamic Balancing System from Germany. Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish
• This tool holder accepts all threaded screw-in indexable mililng cutter which are often called modular indexable tooling, screw in or threaded shank cutter
• Precision ground flat on the shoulder and internal pilot diameter that will self center the threaded indexable cutter
• By accepting right-hand thread cutter into the tool holder, apply cutting force onto the cutter would increase the bond between the cutter and the tool holder
• Runout is less than .0001" from taper to pilot bore
• Made from alloy steel hardened to 54-60 HRc

ProductSiteLaunchDate : 2024-06-25T15:54:08.798Z
Size : 4-Inch
SupplierDeclaredDgHzRegulation : not_applicable