Cart 2 india

Specification
Brand : Shars
BulletPoint1 : MFG SKU #: 404-6800W+202-6927
BulletPoint10 : TIR: 0.0001"
BulletPoint2 : Brand: Shars Tool
BulletPoint3 : Insert Style / Size: APET, APKT, APMT / 11T308
BulletPoint4 : Pilot Diameter: (404-6800W: 8.5mm), (202-6927: 8.5mm)
BulletPoint5 : Cutting Diameter: 16mm
BulletPoint6 : Projection Length: (404-6800W: 25mm), (202-6927: 2")
BulletPoint7 : Axial Depth of Cut AP: 0.433
BulletPoint8 : Nose Diameter: 0.605"
BulletPoint9 : Thread Pitch: M8x1.25
ExternallyAssignedProductIdentifier1 : 0000540468001
ExternallyAssignedProductIdentifier2 : 000540468001
IncludedComponents : 1 Indexable End Mill, 1 Threaded Toolholder, Inserts NOT Included
ItemName : BT30 M8x1.25 2" End Mill 16mm Modular 90° Indexable End Mill APKT 11T308 404-6800W+202-6927 P[
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 11 inches
ItemPackageDimensions_Width : 7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : tool-holders
Manufacturer : Shars Tool
ModelNumber : 404-6800W+202-6927
NumberOfBoxes : 1
NumberOfItems : 2
PackageLevel : unit
PartNumber : 404-6800W+202-6927
ProductDescription :

• Modular milling cutter head is able to cover variety of milling operation in die and mold manufacturing, automobile manufacturing, energy and wind power, and aerospace industry
• Reduce inventory by only replacing cutter heads and not shank, other style of cutter body with different insert is also available
• Feature precision ground surface on the locating shoulder and pilot outside diameter to ensure rigid contact with the threaded tool holder
• Indexable cutter head threads into the tool holder by means of a right hand thread, any cutting force would only increase the bond between tool holder and cutter head
• Reduces vibration on long overhang applications
• Chip thinning effect allows for increased table feeds
• High Positive cutting geometry
• Fitted with 10 degree positive rectangular inserts allow high depth of cut and feed per tooth
• Use APKT / APHT / APET / APMT 11T308 insert (sold separately)
• Setting Angle: 90 degree
• Radial rake angle: -10 degree
• Axial rake angle: 7 degree

---

• This tool holder accepts all threaded screw-in indexable mililng cutter which are often called modular indexable tooling, screw in or threaded shank cutter
• Precision ground flat on the shoulder and internal pilot diameter that will self center the threaded indexable cutter
• By accepting right-hand thread cutter into the tool holder, apply cutting force onto the cutter would increase the bond between the cutter and the tool holder
• Runout is less than .0001" from taper to pilot bore
• Made from alloy steel hardened to 54-60 HRc

ProductSiteLaunchDate : 2024-06-25T15:08:24.369Z
Size : 4-Inch
SupplierDeclaredDgHzRegulation : not_applicable