Cart 2 india

Specification
Brand : GS Tooling
BulletPoint1 : SPECIFICATIONS: Shank Type: Taper Shank, Taper Size: CAT40, Hole Diameter: 1/2", Projection: 3.15", Nose Diameter: 0.94", Decreased Down Time: The total time elapsed to remove one cutting tool and insert another is less than 10 seconds.
BulletPoint2 : MAX GRIPPING TORQUE: Tool is gripped 360° along the entire length of bore producing very high gripping torque, preventing chatter.
BulletPoint3 : Used for layout, set-up, checking heights, depths and setting angles
BulletPoint4 : UNSURPASSED ACCURACY: Concentricity of ≤.0001” (3µm) with tool shrunk in holder.
BulletPoint5 : STABLE OPERATION: GS follows the strictest balance standards. Our holders are pre-balanced G2.5 up to 30,000rpm. Chip load distributed evenly along cutting edge of tool which results in longer tool life.
Color : Gray and Orange
ExternallyAssignedProductIdentifier : 6445587405314
ExternallyAssignedProductIdentifier1 : 0752273561985
ExternallyAssignedProductIdentifier2 : 752273561985
FinishType : Lacquered
IncludedComponents : Tool Cabinet
ItemDisplayWeight : 0.54 ounces
ItemName : GS Tooling 541854 CAT40 1/2" x 3.15" Shrink Fit Holder with Coolant Ports| Hole Diameter: 1/2", Projection: 3.15", Nose Diameter: 0.94"| Balanced to 30000 RPM| Double Tempered Tool Steel Construction
ItemPackageDimensions_Height : 7.31 inches
ItemPackageDimensions_Length : 2.76 inches
ItemPackageDimensions_Width : 2.76 inches
ItemPackageQuantity : 1
ItemTypeKeyword : tool-holders
ItemTypeName : CNC Tool Cabinet
Manufacturer : GS Tooling
Material : Alloy Steel
MeasurementSystem : Metric
MountingType : Wall Mount
NumberOfItems : 1
PartNumber : 541854
ProductDescription : SPECIFICATIONS: Shank Type: Taper Shank, Taper Size: CAT40, Hole Diameter: 1/2", Projection: 3.15", Nose Diameter: 0.94", Decreased Down Time: The total time elapsed to remove one cutting tool and insert another is less than 10 seconds.

MAX GRIPPING TORQUE
Tool is gripped 360° along the entire length of bore producing very high gripping torque, preventing chatter.

EXTENDED HOLDER LIFE
With double tempered tool steel construction, reduced centrifugal forces, minimized bore contamination, and minimized chatter, a GS Shrink Fit Toolholder should far outlast a standard end mill holder.

UNSURPASSED ACCURACY
Concentricity of ?.0001” (3µm) with tool shrunk in holder.

STABLE OPERATION
With double tempered tool steel construction, reduced centrifugal forces, minimized bore contamination, and minimized chatter, a GS Shrink Fit Toolholder should far outlast a standard end mill holder.
ProductSiteLaunchDate : 2023-06-20T14:19:00.759Z
RecommendedUsesForProduct : Tools
RoomType : Home Office
Size : BT/CAT30-168CAP
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Iron
UnitCount : 1