Cart 2 india
In2Cart
Rs. 0
0
Product Information
Editorial Review
These laser-cut fretting scale templates are cut from 0.080" thick clear acrylic sheet, and allow you to quickly, easily and accurately mark a neck of fretboard with the fret positions for the scale you choose. These template includes 24 frets, and also have cutouts for the fret indicator circles. Just use a sharp pencil or a fine-point marker (like the fine-tip Sharpies) and you'll have your fret marking done in no time! INSTRUCTIONS FOR USE: To use one of these templates, lay it on your neck or fretboard and then either measure or "eyeball" the location of the indicator marker cutouts to get it centered. The NUT slot should go over the neck-side edge of wher your nut will go. You do not have to use all 24 frets on your neck, just use as many as work well with your instrument's design. Skip the frets marked at both ends with an "X" for pure diatonic/dulcimer scale. The frets marked with a double X (XX) are optional - if included, this fret will give you the "6.5" dulcimer fret, sometimes also known as the "blue note". CARE AND USAGE: these templates are cut from thin acrylic sheets, and may have the protective peel-off plastic coatings still in place when you receive them. There may also be minor cutting stains left over from the laser cutting process, which can be wiped off with a paper towel. PLEASE BE CAREFUL when handling these templates. Acrylic this thin is rather brittle, and it will snap if you bend it. If you are going to remove the protective plastic masking, lay the template flat on a clean, smooth surface and work at it that way. Be careful with these and don't bend them, and they should last you a long time. Hang them up from a nail in a wall when not in use. If you do accidentally crack it, you should be able to tape or superglue it back together, just make sure to get a nice tight join where it cracked so the scale won't be off.
Features
1) Allows you to quickly and accurately mark necks and fretboards for fret slotting - popular scale length used on Fender(TM) Telecaster(R) and Stratocaster(R) guitars
2) Also perfect for use on homemade instruments and cigar box guitars!
3) Frets to skip for diatonic (dulcimer) scale indicated; also includes cutouts for fret marker dots
4) Includes 24 total frets (two octaves), cut from .080" laser-cut clear acrylic.
5) Acrylic this thin is rather brittle, DO NOT BEND and treat these templates gently!
Specification
Brand : C. B. Gitty
EAN : 0602589217574
Label : C. B. Gitty Crafter Supply
Manufacturer : C. B. Gitty Crafter Supply
PackageDimensions_Weight : 40.00 hundredths pounds
PackageDimensions : L:19.30 X W:3.90 X H:0.60
ProductGroup : Musical Instruments
ProductTypeName : INSTRUMENT_PARTS_AND_ACCESSORIES
Publisher : C. B. Gitty Crafter Supply
Studio : C. B. Gitty Crafter Supply
Title : 25.5-inch Fretting Scale Marking Template for Guitars - Laser-cut-Acrylic - Popular Electric Guitar Scale as used on Fender Telecaster(R) & Stratocaster(R)
These laser-cut fretting scale templates are cut from 0.080" thick clear acrylic sheet, and allow you to quickly, easily and accurately mark a neck of fretboard with the fret positions for the scale you choose. These template includes 24 frets, and also have cutouts for the fret indicator circles. Just use a sharp pencil or a fine-point marker (like the fine-tip Sharpies) and you'll have your fret marking done in no time! INSTRUCTIONS FOR USE: To use one of these templates, lay it on your neck or fretboard and then either measure or "eyeball" the location of the indicator marker cutouts to get it centered. The NUT slot should go over the neck-side edge of wher your nut will go. You do not have to use all 24 frets on your neck, just use as many as work well with your instrument's design. Skip the frets marked at both ends with an "X" for pure diatonic/dulcimer scale. The frets marked with a double X (XX) are optional - if included, this fret will give you the "6.5" dulcimer fret, sometimes also known as the "blue note". CARE AND USAGE: these templates are cut from thin acrylic sheets, and may have the protective peel-off plastic coatings still in place when you receive them. There may also be minor cutting stains left over from the laser cutting process, which can be wiped off with a paper towel. PLEASE BE CAREFUL when handling these templates. Acrylic this thin is rather brittle, and it will snap if you bend it. If you are going to remove the protective plastic masking, lay the template flat on a clean, smooth surface and work at it that way. Be careful with these and don't bend them, and they should last you a long time. Hang them up from a nail in a wall when not in use. If you do accidentally crack it, you should be able to tape or superglue it back together, just make sure to get a nice tight join where it cracked so the scale won't be off.
Features
1) Allows you to quickly and accurately mark necks and fretboards for fret slotting - popular scale length used on Fender(TM) Telecaster(R) and Stratocaster(R) guitars
2) Also perfect for use on homemade instruments and cigar box guitars!
3) Frets to skip for diatonic (dulcimer) scale indicated; also includes cutouts for fret marker dots
4) Includes 24 total frets (two octaves), cut from .080" laser-cut clear acrylic.
5) Acrylic this thin is rather brittle, DO NOT BEND and treat these templates gently!
Specification
Brand : C. B. Gitty
EAN : 0602589217574
Label : C. B. Gitty Crafter Supply
Manufacturer : C. B. Gitty Crafter Supply
PackageDimensions_Weight : 40.00 hundredths pounds
PackageDimensions : L:19.30 X W:3.90 X H:0.60
ProductGroup : Musical Instruments
ProductTypeName : INSTRUMENT_PARTS_AND_ACCESSORIES
Publisher : C. B. Gitty Crafter Supply
Studio : C. B. Gitty Crafter Supply
Title : 25.5-inch Fretting Scale Marking Template for Guitars - Laser-cut-Acrylic - Popular Electric Guitar Scale as used on Fender Telecaster(R) & Stratocaster(R)
