Cart 2 india

Specification
Brand : Metallor
BulletPoint1 : This is a dedicated file for crown (fret mountain) processing after fret grinding.
BulletPoint2 : This fret crowning file with both fine and coarse surfaces. Larger triangles indicate the "coarse" side and the smaller triangles indicate the "fine" side. The arrow shows the filing direction.
BulletPoint3 : R=2mm, usually used for crowning medium frets, suitable for most standard guitar’s frets.
BulletPoint4 : Compact size, 100mm x 20mm x 4mm/3.94inch x 0.79inch x 0.16inch(without silicone rubber grip), this has been made lighter by eliminating the handle, reducing the burden of work, non-slip with rubber band, easy to carry.
BulletPoint5 : High quality carbon steel material, intended for professionals such as musical instrument stores, repair shops, and musical instrument makers.
Color : Orange
ConnectorType : 1/4" jack
ExternallyAssignedProductIdentifier1 : 0790518270605
ExternallyAssignedProductIdentifier2 : 790518270605
GpsrSafetyAttestation : 1
IncludedComponents : Case
ItemName : Metallor Guitar Fret Crowning Files Dual Sized Compact Fret Dressing File for Standard Guitar Frets with Coarse and Fine Cutting Edges Rubber Grip Guitar Luthiers Tools Repair Tools. (2mm-Medium)
ItemPackageDimensions_Height : 0.6 inches
ItemPackageDimensions_Length : 5.12 inches
ItemPackageDimensions_Width : 4.33 inches
ItemPackageQuantity : 1
ItemTypeKeyword : guitar-tools
Manufacturer : Sunsmile
Material : Carbon Steel
ModelName : Guitar Fret Crowning Files
ModelNumber : T FF 10
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 2
PackageLevel : unit
PartNumber : T FF 10
Pattern : Solid
ProductDescription : Product Description

A new tool has appeared for crown processing after fret grinding.

Since you can grip a place close to the part to be scraped, the stability of the work is improved.

Conventional fret crown files were medium-grained on both the upper and lower surfaces, but this series has medium-and fine-grained upper and lower surfaces, so finishing work after crown processing can be performed efficiently.

Specification

Item model number: ‎T FF 10-2mm

Medium, .079"(2mm) width

Suitable for crowning most standard guitar’s frets

For crowning frets after leveling

4 15/16" (100mm) crowning surface

Coarse and Fine crowning surface

Fine With non-slip rubber band

File body size: 100mm x 20mm x 4mm/3.94inch x 0.79inch x 0.16inch

Note

The measurement allowed error is +/- 1-3cm.

Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.


ProductSiteLaunchDate : 2024-05-28T03:49:17.664Z
Size : 2mm-Medium
Style : 2 Pack
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 60131500
WarrantyDescription : 1 year manufacturer.
WasherType : Flat