Cart 2 india

Specification
Brand : RuiJOTWAT
BulletPoint1 : Used to change the angle of a bolt-on guitar neck
BulletPoint2 : Made of solid maple to match the guitar neck
BulletPoint3 : Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck
BulletPoint4 : Keep these on hand for a quick turnaround on this common repair
BulletPoint5 : Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper
BulletPoint6 :
Color : Natural, Silver
ExternallyAssignedProductIdentifier1 : 0840014740116
ExternallyAssignedProductIdentifier2 : 840014740116
FinishType : Powder Coated
GpsrSafetyAttestation : 1
IncludedComponents : Bare Tool
ItemName : RuiJOTWAT Set of 3 Guitar Neck Shims Shim Solid Maple Wooden, Shaped 0.25 0.5, 1 Degree
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : guitar-tools
Manufacturer : RuiJOTWAT
Material : Metal
Material1 : carbon steel
Material2 : wood
ModelName : Walfront
ModelNumber : 2835d547-6c20-4d6d-9c90-ce8900fed3f4
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Mechanical
PartNumber : CPBML000044
PowerSourceType : Manual
ProductDescription :
"About the product:

1. Used to change the angle of a bolt-on guitar neck

2. Made of solid maple to match the guitar neck

3. Better than the typical homemade ""guitar pick"" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck

4. Keep these on hand for a quick turnaround on this common repair

5. Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper



Description:

This set includes 3 hard maple shims, each at a different taper for changing the pitch of any bolt-on neck:



0.25-degree shim offers the most versatility – stacking them will let you really dial in the neck angle you're after.

0.5-degree taper is the one you'll reach for most often – it works great on F and many other solidbody guitars.

1-degree taper for guitars with a Tune-o-matic bridge.

Dimensions: 2-3/16"" x 3"" (55.56mm x 76.12mm)



Taper specs (approximate):

0.25-degree tapers from 0.030"" to 0.019"" (0.76mm to .048mm)



0.5-degree tapers from 0.028"" to 0.008"" (0.71mm to .020mm)



1-degree tapers from 0.060"" to 0.010"" (1.52mm to .025mm)



Package Includes:

3 x Neck Shims"

ProductSiteLaunchDate : 2024-07-30T11:20:46.742Z
Size : 4mm & 5mm(Silver)
StreetDate : 2025-01-30T08:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Wood
UnitCount : 1
UnspscCode : 60131500
WarrantyDescription : 1.
WarrantyType : limited warranty