Cart 2 india

Specification
Brand : ASMC Industrial
BulletPoint : Aftermarket Replacement Parts, Warranty 3 Months.
BulletPoint1 : Please see the specifications in the table below for full details. If you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order.
BulletPoint2 : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot.
BulletPoint3 : ASMC Industrial Brand fasteners are guaranteed to be of the highest quality and are lot controlled, providing traceability to the manufacturer and raw material.
BulletPoint4 : Material:stainless steel
BulletPoint5 : Size:M2 / M2.5 / M3 / M3.5 / M4 / M5 / M6 / M8 / M10 / M12 / M14 / M16
Color : One Color
ExteriorFinish : Plain Finish (No Plating)
ExternallyAssignedProductIdentifier : 9161709147678
ExternallyAssignedProductIdentifier1 : 0647567327999
ExternallyAssignedProductIdentifier2 : 647567327999
ItemName : #10 Internal Tooth Lockwasher Stainless Steel 18-8 Pk 5000
ItemPackageDimensions_Height : 10 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 5000
ItemTypeKeyword : tooth-lock-washers
Manufacturer : ASMC Industrial
Material : Stainless Steel
MetalType : Stainless Steel
ModelNumber : AQXT
NumberOfItems : 5000
NumberOfPieces : 1
PartNumber : 0000-200851
ProductDescription :

PRODUCT SPECIFICATIONS

Part #: 0000-200851

Fastener Type: Internal Tooth Lockwasher
Size Description: #10
Diameter/Nominal Size: #10*
Inside Diameter: 0.195-0.204"
Outside Diameter: 0.365-0.381"
Thickness: 0.018-0.024"
System of Measurement: Inch
Material: Stainless Steel 18-8
Finish: Plain Finish (No Plating)
Average Piece Weight: 0.0003200 lbs.

*Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit).
Actual inside diameter is almost always larger than stated size.
Please see the Inside Diameter spec in the table above, if available.

Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the washer. Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc.


ProductSiteLaunchDate : 2015-11-19T19:04:52.435Z
Size : #10
Style : Internal Tooth Lockwasher
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500
WasherType : Flat