Cart 2 india

Specification
Brand : ASMC Industrial
BulletPoint1 : Please see the specifications in the table below for full details. If you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order.
BulletPoint2 : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot.
BulletPoint3 : ASMC Industrial Brand fasteners are guaranteed to be of the highest quality and are lot controlled, providing traceability to the manufacturer and raw material.
BulletPoint4 : Compact and practical design make them work more stable.
BulletPoint5 : Fine workmanship and material make the washer more .
ExteriorFinish : Zinc Plated
GradeRating : 140HV
ItemName : M8 DIN 6797A External Tooth Lockwasher Low Carbon Steel Zinc Plated Pk 100
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 100
ItemTypeKeyword : tooth-lock-washers
Manufacturer : ASMC Industrial
Material : Low Carbon Steel
ModelNumber : DMLENGOINx3zghsq16w
NumberOfItems : 100
PartNumber : 0000-101589
ProductDescription :

PRODUCT SPECIFICATIONS

Part #: 0000-101589

Fastener Type: External Tooth Lockwasher
Size Description: M8
Diameter/Nominal Size: M8*
Inside Diameter: 8.4mm-8.62mm
Outside Diameter: 14.5mm-15mm
Thickness: 1.6mm
System of Measurement: Metric
Property Class: 140HV
Material: Low Carbon Steel
Finish: Zinc Plated
Standards Met: DIN 6797A
Used with: Bolts/Screws up to Class 8.8
Average Piece Weight: 0.0011000 lbs.

*Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit).
Actual inside diameter is almost always larger than stated size.
Please see the Inside Diameter spec in the table above, if available.

Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the washer. Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc.


ProductSiteLaunchDate : 2015-06-07T16:36:29.536Z
Size : M8
Style : External Tooth Lockwasher
UnitCount : 1
UnspscCode : 31161500