Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : PRISMATIC POWDERS
BulletPoint1 : Illusion Gold Prize is a gold metallic polyester and has a gloss finish.
BulletPoint2 : This color is a polyester metallic powder coat and has a high gloss finish, and requires a clear topcoat
BulletPoint3 : IMPORTANT: Illusion colors only activate when a clear top coat is applied
BulletPoint4 : Gloss: 71-85 Gloss Units
BulletPoint5 : [Notes]Please try on paper before use to confirm that the color matches the paint on your vehicle. This type of pen cannot make the scratches disappear 100%, it can only make the scratches less obvious and prevent the body from rusting. If you have high requirements for scratch repair, please do not buy this type of pen. It is best to seek help from a car repair shop.
Color : Illusion Gold Prize
ColorCode : Black
Coverage : 1
DryingTimeInHours : 0.17
ExternallyAssignedProductIdentifier : 00840397949700
FinishType : Gloss
IncludedComponents : powder coating
IndoorOutdoorUsage : outdoor
IsWaterproof : True
ItemForm : Wax
ItemName : PRISMATIC POWDERS® Illusion Gold Prize (1 LB/PMB-11514) - The Powder Coat Color Experts
ItemPackageDimensions_Height : 15.2908 centimeters
ItemPackageDimensions_Length : 2.1082 centimeters
ItemPackageDimensions_Width : 8.7884 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-top-coat-paints
ItemVolume : 12 milliliters
Manufacturer : Prismatic Powders
ModelName : Illusion Gold Prize
ModelNumber : PMS-11514
NumberOfItems : 1
PaintType : Oil
PartNumber : PMS-11514
ProductDescription : Illusion Gold Prize is a gold metallic polyester and has a gloss finish. Gloss: 71-85 Gloss Units Illusion Information: To achieve this color as shown, the listed top coat, Clear Vision PPS 2974 must also be purchased. Illusion colors only activate when the specified top coat has been applied. The base coat should be applied at a 2.0-3.0 mils thickness for optimal results. The optimal flash time is 2 minutes after the powder flows to a gloss with oven temperature and part metal temperature is at 400° F. The top coat should be applied after the part has thoroughly cooled. Please note that the color will be correct once the top coat is applied. The base coat must cure with the top coat for the proper color. Less than 100% topcoat coverage will yield inconsistent results in color. The Illusion Series is not tribo-compatible. If no top coat is desired, cure for 10 minutes at 400° F (not suggested if the product will be exposed to the elements, the color will be different than the swatch)
Size : 1lb
SpecificUsesForProduct : Exterior
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Metal
UnitCount : 16
UnspscCode : 25170000
WaterResistanceLevel : waterproof