Cart 2 india

Specification
Brand : Malahit
BulletPoint1 : LO Bands:80/60/40/30/20m，Mainboard：1.2 version,RF Board：1.0 version
BulletPoint2 : Assembled With Case:Out of box,Assembled with 3D printed case (army green),raised lettering.
BulletPoint3 : Already Bootloader:Mainboard have been finished the Bootloader and programed the firmware.The serial number has been attached to the bag inside the box.
BulletPoint4 : Call Sign:If you want to program your call sign, you need to read and fully understand the instructions which is in the package.
BulletPoint5 : Excluding Battery Case:If you want, you can see the Battery Case on another page.
BulletPoint6 : Power Jack:3.5mm x 1.35mm.
BulletPoint7 : Firmware Version:1.Official version:programming: No spectrum display.2.Beta version programming: Spectrum display, but the main menu will have slightly fewer other functions than the official version.
BulletPoint8 : No serial Number on the OLED:We have finished the Bootloader, so the serial number will not be displayed on the OLED.
BulletPoint9 : How to find the serial number: The plastic bag in the package has a serial number label.If lose the serial number sticker, you can enter the 18 digit "0" during programming to find the original serial number. （000000000000000000 if unknown)
Color : army green
CompatibleDevices : Camera
CompatibleDevices1 : Laptop
CompatibleDevices2 : Television
CompatibleDevices3 : Router
CompatibleDevices4 : PC
CompatibleDevices5 : Monitor
ConnectorGender : USB, DVI, HDMI, SDI
ConnectorType : Mpo to Mpo
ConnectorType1 : Universal Standard Terminal Lead
ConnectorType2 : 1 X Lc
CustomerPackageType : Box with protective padding or sealed anti-static bag
DataLinkProtocol : IEEE 802.3ab (1000BASE-T), IEEE 802.3z (1000BASE-LX), IEEE 802.3af (PoE)
DataTransferRate : 1 gigabits_per_second
ExternallyAssignedProductIdentifier : 6942108600727
ExternallyAssignedProductIdentifier1 : 0747356312097
ExternallyAssignedProductIdentifier2 : 747356312097
FinishType : Metallic
GpsrSafetyAttestation : 1
HardwareInterface : ethernet
Impedance : 50 ohm
IncludedComponents : SFP module
IncludedComponents1 : Cable
IncludedComponents2 : User Manual
IndoorOutdoorUsage : indoor
InputVoltage : 9 volts
ItemName : usdx tr usdx transceiver 5-Band usdx Multimode QRP Assembled with case by PE1NNZ and DL2MAN Old Army Green
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 2 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : electric-component-fiber-optic-transceivers
Manufacturer : Malahit Tech
Material : Copper
Material1 : Copper
Material2 : fiber
ModelName : Serial Data to Fiber Optic Converter
ModelNumber : G-MPO-OM4-12X-200G-1
NumberOfBoxes : 1
NumberOfChannels : 2
NumberOfItems : 5
NumberOfPins : 9
NumberOfPorts : 1
PackageLevel : unit
PartNumber : G-MPO-OM4-12X-200G-1
PowerPlugType : type_a_2pin_na
ProductDescription :

Overview:

The mainboard is version 1.2 and the RF board is version 1.0.

In this version change, only the mainboard has been changed to 1.2, while the others remain unchanged.

1.(tr)uSDX is the successor of the uSDX Project. It´s the Result of the Collaboration between PE1NNZ and DL2MAN. The design was intended as an easy to build (pre-assembled) Kit.

2.The (tr)uSDX is a 5-Band / Mulitmode QRP Transceiver in Pocket Format (90x60x30mm – 140g). It features a highly efficient Class E PA and Supports CW/LSB/USB and AM/FM. Right now it covers 80 /60/40/30/20m and in Future there will be support for 17/15/12/10m as well.

3.It is supplied with an OLED Display, onboard Mic, (tiny) onboard speaker and for improvised QSO onboard PTT Key can be used as emergency CW Key.

4.Further on, the (tr)uSDX has a (Micro)USB CAT and Programming Interface, and while it produces typically 5W @ 13,8V Power Supply, it can create 0,5W Output from 5V USB Supply alone.

5.It is supplied with OnBoard SWR Bridge and Voltage/Current measurement Hardware, to help in tuning and operation.

Thanks to DL2MAN and PE2NNZ Contribution. We are approved by original designer.

Features:

1.Lo Bands:20m/30m/40m/60m/80m,Out of box,Assembled with 3D printed case (army green),raised lettering.

2.Aboat Bootloader：Mainboard have been finished the Bootloader and programed the firmware,If you want your call sign to appear on your OLED, then you need to program the call sign by yourself.

3.How to program the call sign? Required equipment:

1)tr usdx(serial number is on the bag)

2)computer (download AVR-Dudess software on computer)

3)usb cable.(Please refer to the instructions in the package for details)

Note:

If you want to reprogram/upgrade the firmware (or program your call sign to the firmware), you need to follow these steps :

①Download the firmware（DL2MAN's page）

②Enter the serial number (the serial number is in the package) and download the firmware.

③ Install the USB Driver for the CH340 driver and AVR-Dudess software (if the computer prompts that the AVR-Dudess cannot be installed), please use another computer to install it.

④Restart the computer and use USB cable to connect the mainboard (the computer will make a ding-dong sound at this time, indicating that the CH340 driver software has been installed successfully. If not, it may be that the USB cable has no data transmission function, try to use another USB data cable).

⑤ Open the AVR-Dudess software, and then program the firmware. Please follow the position circled in the picture below, set up the software, and then program.Opening Device Manager under Windows will show the assigned COM-Port(first image below)

How to use the RESET function?

Step 1: Hold down the encoder (do not release your hand), then turn on the power.

Step 2: After displaying the "restart" message on the OLED, release your hand.

The above steps will complete the reset.

ProductSiteLaunchDate : 2025-03-12T03:26:30.678Z
RecommendedUsesForProduct : industrial video transmission, USB 3.0 Vision cameras, HD video surveillance systems, high-speed data acquisition systems, remote storage, digital signage and TV wall, industrial printer system, VA/VR systems
Size : 1m(3.3FT)
SpecificationMet : UL
SpecificUsesForProduct1 : SCADA
SpecificUsesForProduct2 : RTU to host connection
StreetDate : 2024-09-23T00:00:01Z
Style : 1 Pack
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TalkRangeMaximum : 1000 kilometer
TunerTechnology : UHF
UnitCount : 1
UnspscCode : 43190000
Voltage : 13.8 volts
WarrantyDescription : 1 year warranty
WaterResistanceLevel : not_water_resistant
Wattage : 15 watts