Cart 2 india

Specification
Brand : Trvoxviq
BulletPoint1 : Professional Flush Trim Router Bit with double bearings: the independent ball bearings with forced on steel collars at the top of each CNC bit ensures smooth and precise trimming.1/2'' (12.7mm)shank and cutting diameter, 3/4'' (19.05mm), 1-3/4'' (45mm) cutting length, and 4-5/32'' (105.8mm) total length.
BulletPoint2 : Trvoxviq 1/2'' shank Spiral Router bits are made of solid VIRGIN carbide(Integral tungsten steel), Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
BulletPoint3 : Wide Range of Applications: The up down double bearing flush trim bit 1/2 shank is perfect for MDF,density board, sandalwood, compression board, softwood, hardwood, plywood, laminate, Medium Fiber Board,oak, Chipboard and any hardwood finish.1/2 trim router bits are used on trimmers, hanging skeletonizers, engravers and cutters
BulletPoint4 : Spiral Cutting Router Bit with sharp cutting edge, combined with bearings to improve chip removal speed, prevent knife sticking, smooth and delicate cutting surface without burrs, and improve work efficiency. Please choose a cutting length that exceeds the board by 2-5mm, or it will result the template router bit breaking.
BulletPoint5 : Warm Tips: The longer the length of the flush cut bit clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance. The solid tungsten steel spiral flush trim bits are not suitable for low-speed machines such as bench drills, electric drills, etc
CutType : Flush-Trim Cut
CutType1 : Flush-Trim Cut
CutType2 : Carbide-Tipped Cut
ExternallyAssignedProductIdentifier1 : 764126753843
ExternallyAssignedProductIdentifier2 : 0764126753843
ExternallyAssignedProductIdentifier3 : 00844278025057
GpsrSafetyAttestation : 1
IncludedComponents : Flush Trim Router Bit
ItemName : Flush Trim Router Bit 1/2 Inch Shank, 3/4" Cutting Dia Spiral Up Down Double Bearings, 1-3/4" Length Template Pattern for Woodwork Trimming
ItemPackageDimensions_Height : 1.2 inches
ItemPackageDimensions_Length : 4.5 inches
ItemPackageDimensions_Width : 3.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : trim-router-bits
Manufacturer : Trvoxviq
Material : Tungsten Steel
Material1 : Carbide
Material2 : Alloy Steel
ModelNumber : 45LXB1
NumberOfFlutes : 2
NumberOfItems : 1
PackageLevel : unit
PartNumber : 45LXB1
ProductDescription : Trvoxviq Flush Trim Router Bit 1/2 Inch Shank, Up Down Bearing Slotted Flat Trimming Router Bits with Nano Coating, 3/4 Inch Cutting Dia Milling Cutter Pattern Template Tools for Woodworking

Professional Flush Trim Router Bit with double bearings: the independent ball bearings with forced on steel collars at the top of each CNC bit ensures smooth and precise trimming.

1/2'' (12.7mm)shank and cutting diameter, 3/4'' (19.05mm), 1-3/4'' (45mm) cutting length, and 4-5/32'' (105.8mm) total length.

Trvoxviq 1/2'' shank trim bits are made of solid VIRGIN carbide(Integral tungsten steel), Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity.

This provides longevity and produces cutting results of the highest quality.

Wide Range of Applications:The up down double bearing flush trim router bit 1/2 shank is perfect for MDF,density board, sandalwood, compression board, softwood, hardwood, plywood, laminate, Medium Fiber Board,oak, Chipboard and any hardwood finish. Flush Trim Router Bit 1/2" shanks are used on trimmers, hanging skeletonizers, engravers and cutters

CNC milling cutter with sharp cutting edge, combined with bearings to improve chip removal speed, prevent knife sticking, smooth and delicate cutting surface without burrs, and improve work efficiency.

Please choose a cutting length that exceeds the board by 2-5mm, or it will result the end mill breaking.

Warm Tips: The longer the length of the milling cutter tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.

The solid tungsten steel end mills are not suitable for low-speed machines such as bench drills, electric drills, etc
ProductSiteLaunchDate : 2024-05-07T07:31:39.985Z
Size : 5/16" Dia.
Style : 45mm Cutting Length
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 27112800