Cart 2 india

Specification
Brand : Gearwell
BulletPoint1 : BIT SPECIFICATIONS: Includes 2 pieces flush trim router bits with standard 1/2 inch shank, 3/4 inch cutting diameter, 1‑11/16 inch and 2‑9/16 inch cutting lengths, providing accurate processing.
BulletPoint2 : CARBIDE MATERIAL: These router bits are made of tungsten steel carbide, which has high hardness, impact , can withstand large amounts of use, and provide consistent performance over time.
BulletPoint3 : WOODWORKING USE: These flush trim router bits are for various woodworking applications, suitable for both woodworking hobbyists and professionals, improving the quality of your project.
BulletPoint4 : EFFICIENT AND : These spiral router bits have incisive blades design, providing clean incision and a glossy appearance for your wood products, greatly improving processing efficiency and quality.
BulletPoint5 : DOUBLE BEARING: These flush trim router bits have upper and lower double bearing design, which can better support the rotation of the drill bit, and greatly extend the service life of the router bit.
CutType1 : Carbide-Tipped Cut
CutType2 : Under Cut Acut
ExternallyAssignedProductIdentifier1 : 637881713202
ExternallyAssignedProductIdentifier2 : 0637881713202
IncludedComponents : No
ItemName : Gearwell Flush Trim Router Bit, Spiral Trimmer with Upper Lower Bearing, 1 2in Shank, 3 4in Diameter, 1-11 16in & 2-9 16in Cutting Length for Woodworking
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 13 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : trim-router-bits
Manufacturer : Gearwell
Material : Carbide
ModelNumber : Gearwellhatd3cg84n
NumberOfFlutes : 1
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : Gearwellhatd3cg84n
ProductDescription :
Item Type: Flush Trim Router Bit
Material: Tungsten Steel Carbide
Shank: 1/2 Inch
Cutting Diameter: 3/4 Inch
Cutting Length: 1-11/16 Inch, 2-9/16 Inch

Package List：
2 x Trim Router Bit
2 x Storage Boxes

Note:
1. It is recommended to use tools with a large shank diameter and short blade. Excessively long blade may cause vibration and deviation.
2. Tools can only be applied for wood processing, not for metal and stone processing.
3. If the tool jumps, stop working immediately, reinstall and clamp it again until full before working.
4. The tool shank must be completely inserted into the chuck, tightened firmly, otherwise it may cause the shank to break.
5. When operating, security measures such as goggles, ear guard devices, face covers, gloves, etc. must be worn.

ProductSiteLaunchDate : 2025-02-23T04:17:45.974Z
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 27112800