Cart 2 india

Specification
Brand : Ultra-Shear
BulletPoint1 : SPECS - 1/2" Cut Diameter | 1/4" Shank | 1-1/8" Cutting Length | 3-1/2" Overall Length | Compression Up & Down Cut | 2 Flute | Solid Carbide | Flush Trim | Top & Bottom Bearings | Spiral Router Bit | USA Made
BulletPoint2 : SOLID CARBIDE - This spiral flush trim 1/4" shank router bit with 1/2" diameter is made from a solid piece of carbide. We use state-of-the-art CNC grinding equipment, highest quality solid carbide blanks and ultra-fine grinding wheels to produce our American-made router bits.
BulletPoint3 : COMPRESSION SPIRAL GEOMETRY - Up-Cut bits can chip the top edge of the cut in plywood and other man-made materials. Down-Cut bits leave a beautiful edge on the top surface, but can tear out the bottom edge. Our Compression Bits combine the best of both. The shearing action is always toward the center of your material.
BulletPoint4 : TOP & BOTTOM BEARING PILOTS - The Ultra-Shear 1/4 shank router bit is great for flush trimming and can handle tight corners really well. It uses a top bearing and a bottom bearing pilot that follows your project pattern template leaving surfaces needing minimal sanding.
BulletPoint5 : AMERICAN MADE QUALITY - Like all Ultra-Shear products, the 1/4" Spiral Flush Trim Router Bits are made right here in our Strongsville, Ohio, facility just south of Cleveland.
CutType : Flush-Trim Cut
ExternallyAssignedProductIdentifier1 : 0854921008702
ExternallyAssignedProductIdentifier2 : 854921008702
IncludedComponents : Flush Trim Router Bit with 1/4 Shank
ItemName : Ultra-Shear Solid Carbide Flush Trim Router Bit, 1/2" CD, 1/4" SH, 1-1/8" CL, 2FL, Compression, Spiral Bit, Top & Bottom Bearing for Template Pattern
ItemPackageDimensions_Height : 0.75 inches
ItemPackageDimensions_Length : 8 inches
ItemPackageDimensions_Width : 4.25 inches
ItemTypeKeyword : trim-router-bits
Manufacturer : Ultra-Shear
Material : Carbide
ModelNumber : Genericnqha5ostb0
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : US2512UC
ProductDescription :

Ultra-Shear Flush Trim Router Bits – Compression Spiral, Solid Carbide, 2 Flute, 1/4” Shank, 1/2" Cut Diameter, 1-1/8" Cut Length. Made in USA

This Ultra-Shear bit breaks new ground in compression router bit design. Almost every major router bit manufacturer has a compression flush trim bit with bearings both above and below the edges. You’ll find them with names like Ultimate, Mega and Max. But despite the names, there's still room for something new. Those bits are all 1/2" shank, leaving out many handheld and trim routers. They're all 3/4" or larger cutting diameter, limiting their use in pattern routing. And more importantly they're some combination of carbide brazed to steel which can introduce balance and runout issues. We decided to offer you something better, the Ultra-Shear Solid Carbide Compact Compression Pattern and Flush Trim Bit is a true 100% solid carbide bit with perfect concentricity. It's 1/4" shank so you can use it in the trim or standard router of your choice. And, at 1/2" cutting diameter with 1-1/8" of cut length, it’ll tackle tight radius template projects that others just can’t.

Up-Cut bits evacuate the shavings most efficiently, but can chip the top edge of the cut in plywood and other man-made materials. Down-Cut bits leave a beautiful edge on the top surface, but can tear out the bottom edge. Our Compression Bits combine the best of both. Whether working with tight corners or delicate materials, our bits provide exceptional results.

Made in the USA - Our spiral flush trim router bits boast super sharp spiral flutes that cut quickly and efficiently, making them ideal for various woodworking applications. Thanks to state-of-the-art CNC grinding equipment and the highest quality solid carbide blanks, these bits offer unparalleled durability and precision.

ProductSiteLaunchDate : 2024-06-20T17:47:56.069Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112821