Cart 2 india

Specification
Brand : MIFADLE
BulletPoint1 : დ Made from a high-tech ceramic material to stay sharper longer.
BulletPoint2 : დ Fit for Andis Blackouts, GTX, Andis T-outliner,Andis T-outliner Cordless
BulletPoint3 : დ This replaces the small moving cutter blade. Can also be used to upgrade steel blades to ceramic blades. Simply replace the steel cutter of a steel blade with a ceramic cutter.
BulletPoint4 : დ The pictures are accurate because of real shooting, please check it carefully to make sure it is what you need.
BulletPoint5 : დ Package including: 1 X Replacement T-Blade
BulletPoint6 : Please Note: Please double check our pictures part numbers and description to make sure it is what you need before ordering
Color : Gold
ItemName : Hair Trimmer Replacement T Beard Trimmer Replacement T Blade Hair Clipper Set Gold
ItemTypeKeyword : hair-trimmer-and-clipper-blades
Manufacturer : MIFADLE
NumberOfItems : 2
PartNumber : MIFA-1357-G10
ProductDescription : Description:
Made from a high-tech ceramic material to stay sharper longer.
Heat resistant for a cooler and more comfortable cutting.
Rockwell Hardness rating of 78.

Fit Model：
Fits for Andis Blackouts
Fits for Andis GTX
Fits for Andis T-outliner
Fits for Andis T-outliner Cordless

Easy Installation:
This replaces the small moving cutter blade.
Can also be used to upgrade steel blades to ceramic blades.

Install and adjust 0 gap for the blade
Use screw driver, Remove the screw from the trimmers.
Install the Plate and put metal gasket on the top. and don not tighten the screw, Leave a little space for the plate. So the plate can move up and down. Which can enable the moving blade more closely to the guide blade.
Make the moving blade towards to the guide blade. Then you need a flat surface, to lay it flat, make a little bit angel for guide blade, like 10 degrees, so the moving blade is a little bit underneath the guide blade. From that angle, tighten the screws. Then you don’t cut yourself, because the moving blade is very sharp.
Check if it is ok. Use your finger cross the blade, if it is smooth, the adjustment is OK. If it was rough, which means the moving blade was higher than guide blade, you need make more several time to try it out.
Reattach the blade to the trimmer head, and tighten the two screw
ProductSiteLaunchDate : 2025-02-27T03:36:08.832Z
UnitCount : 1
UnspscCode : 52141700