Cart 2 india

Specification
Brand : Hilitand
BulletPoint1 : MATERIAL: It is made of aluminum alloy + aluminum die-casting. It has the characteristics of light weight, strong toughness, resistance, aging resistance, and drop resistance. It is not easy to deform and can be used for a long time.
BulletPoint2 : BALL BEARING STRUCTURE: The unique ball bearing structure design is flexible to use, and the cutting pressure is easy to control; it saves labor during cutting, and the pipe is not easy to slip during use.
BulletPoint3 : LIGHTWEIGHT AND LABOR-SAVING: High hardness and wear-resistant blades, and , small cutting , saving time and effort, and achieving clean cutting; The bearing wheel design, evenly distributed, has good grip balance, ensuring smooth cutting without running the knife, improving Work efficiency.
BulletPoint4 : USES: Vertical tools for pipe cutting; commonly used for cutting copper pipes, aluminum pipes, stainless steel corrugated pipes, PPR pipes, etc.
BulletPoint5 : SMALL AND COMPACT: The cutting range is 6-50mm / 0.2-2in, small and compact, designed for confined spaces on small-diameter pipes.
ItemName : Hilitand Roller Pipe Cutter, Tube Cutter, Roller Bearing Knob Adjustment Manual Metal Pipe Cutter of 6 to 50mm for Cutting Copper Tube, Tube Cutters, Hilitandg532aeg7c4
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 24 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemTypeKeyword : tube-cutters
Manufacturer : Hilitand
ModelName : Hilitandg532aeg7c4
ModelNumber : Hilitandg532aeg7c4
PartNumber : Hilitandg532aeg7c4
ProductDescription : 1. Bearing grip wheel design, 6 bearings are evenly distributed, and a good grip balance ensures smooth cutting.2. Made of aluminum material, it has the characteristics of light weight, strong toughness, resistance, aging resistance, etc.3. Highly hardened wearable incisive blade, small cutting , can cut iron pipes, etc.4. The unique ball bearing structure design saves effort when cutting, and it is not easy to slip when clamped tightly.5. Commonly used for cutting copper pipes, aluminum pipes, stainless steel corrugated pipes, PPR pipes, etc.Specification:Item Type: Pipe CutterModel: WK-650Material: Aluminum Alloy + AluminumPurpose: CuttingApplicable Materials: Used for cutting copper pipes, aluminum pipes, stainless steel corrugated pipes, PPR pipes, etc.Cutting Range: Approx. 6-50mm / 0.2-2inHow to Use:1. Place the pipe between the roller and the cutting wheel, the side wall of the pipe is tightly attached to the middle position of the two rollers, and the cut of the cutting wheel is clamped perpendicular to the pipe.2. Then turn the adjustment handle to make the blade of the cutter cut into the pipe wall, and then evenly rotate the cutter around the pipe as a whole.3. After one turn, turn the adjusting handle to make the cutting blade further cut into the pipe. The amount of knife should not be too much each time, just screw in 1/4 turn, and then continue to rotate the knife, and then screw the Turn until the tube is cut off.4. The mouth of the cut pipe should be neat and smooth, suitable for expanding the pipe mouth.packing list:1 x Pipe Cutter
ProductSiteLaunchDate : 2024-02-23T13:31:24.765Z
UnspscCode : 53120000