Cart 2 india

Specification
Brand : Speedway Motors
BulletPoint : Structural Frames Furniture Fabrication Railings and Guardrails Automotive Applications Gate and Fence Construction Tool and Equipment Frames Signage Supports Outdoor Recreational Structures Machinery Frames Construction Scaffolding or Bracing
BulletPoint1 : These chromoly swedged tubes work well for suspension links on circle track cars, road race, street cars, and more
BulletPoint2 : 1 1/16" OD 4130 Chromoly tubing with .065" wall thickness ensures strength without adding excessive weight
BulletPoint3 : 5/8"-18 RH thread in one end and LH thread in the other allows for easy length adjustment of the assembly by spinning the tube
BulletPoint4 : Useful for 4 link bars, 2 link bars, Panhard bars, front control arms, steering tie rods, etc.
BulletPoint5 : Zinc plated to resist corrosion
Color : Chrome
ExternallyAssignedProductIdentifier1 : 0301635852119
ExternallyAssignedProductIdentifier2 : 301635852119
IncludedComponents : Tubular Steel
ItemDisplayWeight : 2.99 pounds
ItemLength : 48 inches
ItemName : 5/8 Chrome Moly Swedged Tube, 5 Inch Length
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 28 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : steel-tubes
Manufacturer : Speedway Motors
Material : Chromoly
MaximumPressure : 46000 pounds_per_square_inch
ModelName : Speedway Motors
ModelNumber : OPSTSQ2x2125
NominalWallThickness : 0.65 inch
NumberOfItems : 1
NumberOfPieces : 25
PackageLevel : unit
PartNumber : 91034558-5
ProductDescription : Zinc plated 4130 chromoly steel tube with .065-inch wall thickness for four-link, control arm, and other chassis uses. Suitable for Panhard rod, drag link, chassis bracing, and more. Ends threaded 5/8-18 LH and RH threads for rod ends or clevises of your choice. Available in 25 lengths from 4-inches to 24-inches long, most in 1-inch increments. Outside diameter of tube is 1 1/16-inch. Thin wall construction with swedged ends offers lighter weight than comparable non-swedged tubes. Single rotation will adjust the overall length in or out by approximately 1/8-inch. Order by actual length measurement required for application. Swedged Tubing Provides Similar Strength with Less Weight Weight is the enemy of a race car. Any time you can save weight without reducing integrity or creating an unsafe situation you will benefit. Utilizing thin wall chromoly steel tubing for such things as control arms, Panhard bars, steering linkage, and more are all great ways to not only save weight but allow your suspension and steering to react faster to changes in the track surface, which ultimately keeps your race car’s tires in contact with the racing surface for precise throttle, braking, and steering control that can put you in the winner’s circle. One easy way to save weight is to replace heavy wall steel suspension and steering tubes with thin wall chromoly steel versions that utilize a swedged end. Swedged tubing is the perfect upgrade to these suspension and steering pieces when sized properly for the application. Swedging the ends of the chromoly steel tubing shrinks the outside diameter down, which thickens the wall of the tubing in the area where threads are created for the heim joint, bushing, or clevis end piece to be installed. This critical area is machined from a solid billet of steel and threaded internally and then welded to the chromoly tubing, which further strengthens the tube
ProductSiteLaunchDate : 2017-01-26T20:08:03.356Z
Size : One Size
SpecificUsesForProduct1 : Home Improvement
SpecificUsesForProduct2 : Structural Frames
SpecificUsesForProduct3 : Furniture Fabrication
SpecificUsesForProduct4 : Tool and Equipment Frames
SpecificUsesForProduct5 : Outdoor Recreational Structures
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40142000