Cart 2 india

Specification
Brand : Gemm Piano Supply
BulletPoint1 : Professional Tuning Pin Crank
BulletPoint2 : Designed to be use for winding coils
BulletPoint3 : Measures 2-1/8" in width from the shaft centers
BulletPoint4 : Preferred by Piano Technicians
BulletPoint5 : Qty: 1
ExternallyAssignedProductIdentifier1 : 0615264398390
ExternallyAssignedProductIdentifier2 : 615264398390
ExternallyAssignedProductIdentifier3 : 746122866017
ItemName : Gemm Piano Tuning Pin Stringing Crank (Ball Handle)
ItemPackageQuantity : 1
ItemTypeKeyword : tuning-devices
Manufacturer : OdontoMed2011®
Material1 : Nickel plated steel
Material2 : Hardwood handle
ModelNumber : 512-C
NumberOfItems : 1
PartNumber : GPS-A109
ProductDescription : Professional Tuning Pin Crank one piece with hardwood handle.

Has a square tip opening that fits onto tuning pins for easily winding coils.

Nickel plated steel crank

Measures:

2-1/8" in width from the shaft centers
Ball handle is 1-3/4"diameter

Qty: 1

Follow the step-by-step directions given in learning to use the tuning pin crank.

1. Holding the tuning pin in your left hand with the hole in the pin (the eye) facing you, use your right hand to insert the becket of the wire into the eye of the pin (Photo 2)
2. Maintaining a firm pressure with your thumb on the string while cradling the pin in the crook of your fingers (Photo 3). With your right hand, slowly begin to turn the crank in a clockwise direction with 3 turns.
3. Let the pin rotate freely in the crook of your fingers (Photo 4). Push hard on the wire to avoid having the becket pop out of the eye of the pin. If this hurts your thumb, you might consider wearing cloth or leather work gloves. Some technicians wear gloves as a matter of course to avoid getting oil from their skin on the string.
4. When removing from the eye of the pin (Photo 5) inserting a small flat-bladed screwdriver under the first turn of the coil in next to the becket, and levering the string out of the eye.
5. The completed coil (Photo 6). To insert on a new or existing pin, line the wire end up with the eye the pin, and squeeze the becket in place with a pair of pliers.

DO NOT USE this tool as a Hammer Tuning Lever

The #1 choice for Piano Technicians.

Made in United States
ProductSiteLaunchDate : 2016-12-03T03:22:19.997Z
Size : Ball Handle
UnitCount : 1
UnspscCode : 60131500