Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
AutoPartPosition : right
AutoPartPosition1 : rear
AutoPartPosition2 : front
Brand : LuckyBike
BulletPoint1 : Universal Turn Signals; Works With All 12V DC Systems
BulletPoint2 : Versatile Mount Anywhere Design
BulletPoint3 : High Impact Plastic Housing and Lens
BulletPoint4 : Great Signal Alternative for Suzuki GSXR, Honda CBR, Kawasaki Ninja, and Yamaha YZF as well as Ducati, KTM and More
BulletPoint5 : Can Be Used on Many Different Powersports Vehicles, Side by Sides, and Trailers
Color : Smoke
CompatibilityOptions : Rear LED Turn Signals Light Bracket Fit For XL 883 1200 Sportster 1992-2017 Super Low XL883L Custom XL883C Hugger XLH883 Nightster XL1200N Super Low XL1200T
CompatibleWithVehicleType : Motorcycle
CompatibleWithVehicleType1 : Motorcycle
CompatibleWithVehicleType2 : Car
ExteriorFinish : Smooth
ExternallyAssignedProductIdentifier : 7340691453178
ExternallyAssignedProductIdentifier1 : 029882842867
ExternallyAssignedProductIdentifier2 : 0029882842867
FitType : Universal
IsAssemblyRequired : 1
ItemName : Surface Mount Light Flow Turn Signal Universal Motorcycle Smoke Blinker
ItemPackageDimensions_Height : 3 inches
ItemPackageDimensions_Length : 9 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : powersports-turn-signal-assemblies
Manufacturer : LuckyBike
ModelName : MJKO1uvhbga8me
ModelNumber : MJKO1uvhbga8me
NumberOfItems : 1
PartNumber : 15-501-SM
ProductDescription : Install Notes: Always test the lights before installation to ensure they work properly. After testing, we recommend disconnecting the battery before starting signal installation. The installation difficulty will vary depending on your application; depending on where you decide to mount them, it may require modification to the fairing. Once you pick a mounting location it's time to locate the existing Turn Signal Wires on your bike, you should have either a 3 or 2 wire system. If you have a 3 Wire System, the wire for the running lights are not used in this installation.2 Wire SystemThe other two wires on your bike will be the Turn Signal Power (Positive Wire) and a Ground (Negative Wire). Attach the YELLOW Turn Signal Wire to the Bikes Positive Signal Wire and the BLACK Turn Signal Wire to the Bikes Negative Signal Wire. Test the light and ensure it functions properly prior to putting everything back together. If it's good, repeat the process for the other side. Reassemble, Ride and Enjoy! Do not over-torque mounting nut when installing, it should be hand tight and not forcefully clamped down, we recommend using Thread locker on all bolts used in a motorcycle application (Blue/Medium).
ProductSiteLaunchDate : 2024-03-01T15:01:22.000-05:00
SpecificUsesForProduct : Signalling Light
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25172900
Voltage : 6 volts
WarrantyDescription : 30 days manufacturer's defects only
Wattage : 10 watts