Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
AutoPartPosition : rear
Brand : TurningMax
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
BulletPoint6 : DOT, ECE, and INMETRO certified - Please check your local regulations
BulletPoint7 : 1 Bulb - Single blister packaging
Color : Red LED
ColorTemperature : 6000 kelvin
CompatibleWithVehicleType : Car
ExteriorFinish : Machined
ExternallyAssignedProductIdentifier1 : 7502278672451
ExternallyAssignedProductIdentifier2 : 07502278672451
FitType : Vehicle Specific
IncludedComponents : Bulb
ItemName : TurningMax 54-SMD Brilliant Red Full LED Sequential Dynamic Flash Turn Signal Lighting Kit Compatible With 2016-up Mazda MX-5 ND Taillamps
ItemPackageDimensions_Height : 1.6 inches
ItemPackageDimensions_Length : 6.5 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-light-bulbs
Manufacturer : TurningMax
Material : Aluminum
ModelName : taillight
ModelNumber : 34903-SF1-A01
ModelYear : 2016
NumberOfBoxes : 1
NumberOfItems : 2
OemEquivalentPartNumber : HONDA%34903-SF1-A01
OperatingLife : 40000 hours
PackageLevel : unit
PartNumber : TM-187-red
PartTypeId : 11718
ProductDescription : Features：

Fit 2016-up Mazda MX-5 ND
Special designed dynamic flash LED circuit board powered by 54 pieces of super bright amber LED diodes, comes with direct plug-in hyper flash eliminating load resistors
Plug and play installation to replace the stock 7440 rear turn signal bulbs with a modern sequential flashing full LED blinker (instead of just one spot lighting up, you will have the entire housing lighting up) No need to bake open the tail lamp for a retrofit installation, simply remove the OEM tail lamp (NA1J51150F NA1J51160F), directly replace the 7440 turn signal bulb from the back with the full LED circuit board, and plug in the 50W 6-Ohm resistor between the taillamp and stock harness to prevent the LED light from rapid flashing

Description：

Want to convert your rear turn signal bulbs to a more modern sequential style?

This page features the sequential red LED turn signal circuit board kit for the following vehicles:

2016-up Mazda MX-5 Miata ND
Your package will include 2 special designed LED circuit boards that are powered by 54 pieces of super bright amber LED diodes as well as 2 direct plug-in hyper flash eliminating load resistors. This kit features a plug and play installation to replace the stock 7440 rear turn signal bulbs. There is no need to bake open the tail lamp for a retrofit installation, simply remove the OEM tail lamp (NA1J51150F NA1J51160F), directly replace the 7440 turn signal bulb from the back with the full LED circuit board, and plug in the resistor between the taillamp and stock harness.
Give your Mazda upgraded sequential turn signal lights for a more unique and modern style!


ProductSiteLaunchDate : 2021-09-28T04:02:16.261Z
Size : Standard - 55W
SpecificUsesForProduct : Signalling Light
StreetDate : 2018-01-04T00:00:01Z
Style : Single Blister
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 25172900
Voltage : 12 volts_of_direct_current
WarrantyDescription : 1 Year Limited
Wattage : 50 watts