Cart 2 india

Specification
Brand : Shorpioen
BulletPoint1 : A fastener with unified thread pitch and a cylindrical, low profile head with small, rectangular ribs protruding from the underside of the head. The top of the head is flat and is flush with the mating surface when installation is complete. Below the ribs and above the first thread is an annular groove which helps to hold the fastener in position.
BulletPoint2 : Intended for metal panel-to-panel applications and well-suited for use in printed circuit boards. A hole is pierced into the circuit board and the unit it is attached to. The stud is inserted using a hand press or by hand, applying parallel squeezing fo
BulletPoint3 : As the application force is applied, part of the sheet cold flows into an undercut under the head, making the fastener an integral part of the sheet.
BulletPoint4 : Total Length: 80mm / 3.15"; Thread Style: Partially Thread (Total Length: 80mm / 3.15"; Thread Style: Partially Thread
BulletPoint5 : Screw quality: M4 x 80mm; Thread End Length: 22mm / 0.86"(Each) (Screw quality: M4 x 80mm; Thread End Length: 22mm / 0.86"(Each)
Color : Multiple colors
GradeRating : Grade 304
ItemName : 3/8-16X1 Self Clinching Stud 12 Rib Full Thread 300 Series Stainless Steel (Pack Qty 250) BC-3716SCN300 by Shorpioen
ItemPackageQuantity : 250
ItemTypeKeyword : unequal-thread-length-rods-and-studs
Manufacturer : Shorpioen LLC
Material : 300 Stainless
ModelNumber : BC-3716SCN300
NumberOfItems : 250
PartNumber : BC-3716SCN300
ProductDescription : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot. A fastener with unified thread pitch and a cylindrical, low profile head with small, rectangular ribs protruding from the underside of the head. The top of the head is flat and is flush with the mating surface when installation is complete. Below the ribs and above the first thread is an annular groove which helps to hold the fastener in position.. Intended for metal panel-to-panel applications and well-suited for use in printed circuit boards. A hole is pierced into the circuit board and the unit it is attached to. The stud is inserted using a hand press or by hand, applying parallel squeezing forces. A hex nut is twisted onto the stud, securing it from the back. As the nut is tightened, the ribbed stud head grips the front panel to secure the application from the front as well, eliminating the need for welding.. As the application force is applied, part of the sheet cold flows into an undercut under the head, making the fastener an integral part of the sheet..
ProductSiteLaunchDate : 2016-11-17T16:15:54.958Z
Size : 3/8-16X1
Style : Manual
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 31161500