Cart 2 india

Specification
Brand : HiFimeDIY
BulletPoint1 : Supports 1.1, 2.0, 3.0, 3.1 USB ports and Supports Low (1.5Mbps), Full (12Mbps) and Hi-speed (480Mbps) mode by automatic detection
BulletPoint2 : Supports audio and other devices including high resolution 384kHz and DSD DACs, USB midi devices, USB mixers, USB microphones
BulletPoint3 : Provides 400mA to the connected USB device (or 500mA if your computer's USB port can supply <600mA to the isolator). 400mA is sufficient for most devices.
BulletPoint4 : Works with Thunderbolt ports on the computer, BUT NOT with (audio) devices that requires Thunderbolt connection
BulletPoint5 : No driver required, no settings to configure, Self powered, no external power needed, Size: 55x35mm + cable 10cm
Color : Black
CompatibleDevices : Desktop
CompatibleDevices1 : Audio Device
CompatibleDevices2 : USB Midi Device
CompatibleDevices3 : USB Mixer
CompatibleDevices4 : USB Microphone
CompatibleDevices5 : DAC
ConnectorType : usb
ConnectorType1 : USB Type A
ConnectorType2 : USB Type C
CurrentRating : 400 milliamps
ExternallyAssignedProductIdentifier1 : 0649906720478
ExternallyAssignedProductIdentifier2 : 649906720478
FinishType : Matte
InputVoltage : 5 volts_of_direct_current
ItemName : Hifime Hi-speed USB Isolator, high speed 480 Mbps, USB Galvanic insulation, noise and ground loop removal
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 13 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : computer-cable-usb-to-usb-adapters
Manufacturer : Hifime
Material : copper
ModelNumber : 7b1b2c3d-d363-4e26-ba61-3011ee04a235
NominalPower : 10 watts
NumberOfItems : 1
NumberOfPorts : 2
PartNumber : Art5521-3.5mm-6
PowerPlugType : no_plug
ProductDescription : The High-Speed isolator provides galvanic isolation between the USB host and device and protects the device from power shocks and avoid ground loops that can be very troublesome in audio. It supports USB transfer modes Low (1.5Mbps), Full (12Mbps) and Hi-speed (480Mbps). Hi-Speed 480Mbps are required by DACs that support higher than 96kHz/24bit sample rates, and also multi channel DACs. The new isolator also provides more power, 400mA to the connected device, vs 200mA from the other USB isolator. This isolator does not support USB SuperSpeed 5Gbps, however this mode is rarely if ever used by audio devices. A handful of audio devices requires Thunderbolt, which is not supported by this isolator. A few soundcards like Apollo Twin USB require USB Super speed mode which is also not supported.
ProductSiteLaunchDate : 2023-05-30T02:48:14.215Z
SpecificUsesForProduct : Cell Phone
SpecificUsesForProduct1 : Musical Instruments
SpecificUsesForProduct2 : Speaker
SpecificUsesForProduct3 : Microphones
SpecificUsesForProduct4 : Headphone
SpecificUsesForProduct5 : Amplifier
Style : 5.5x2.1 to 3.5mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 43202222
WarrantyDescription : 6 Months
WarrantyType : Lifetime