Cart 2 india

Specification
Brand : Comp Cams
BulletPoint1 : removes or installs two springs at a time, no need to remove all rocker arms
BulletPoint2 : works with heads either on or off the engine
BulletPoint3 : simple design facilitates easy usage in tight spaces
BulletPoint4 : fits 3/8 inch and 7/16 inch rocker arm studs
BulletPoint5 : durable steel design comes with a lifetime guarantee against failure
BulletPoint6 : Fit type: Vehicle Specific
Color : Black
ExternallyAssignedProductIdentifier : 7427046749596
ExternallyAssignedProductIdentifier1 : 036584233275
ExternallyAssignedProductIdentifier2 : 0036584233275
ExternallyAssignedProductIdentifier3 : 00036584233275
FitType : Vehicle Specific
ItemDisplayWeight : 1.25 pounds
ItemName : Comp Cams 5337 Valve Spring Compressor Tool for Small Block Chevy
ItemPackageDimensions_Height : 15 centimeters
ItemPackageDimensions_Length : 9.8 centimeters
ItemPackageDimensions_Width : 10.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-valve-train-tools
Manufacturer : COMP Cams
ModelName : 5337
ModelNumber : 5337
NumberOfItems : 1
OemEquivalentPartNumber : N
PartNumber : 5337
PartTypeId : 10956
ProductDescription :

BARRING TOOL FEATURES:

FIT: Cummins Diesel B/C Series 5.9L and 6.7L Engines (1988-Current)

Ttight-tolerance machined steel with solid teeth that will not chip out or break.

Save-time turning over the engine or crank to perform manual valve lash adjustment. Used to slowly rotate the engine by hand so you can line up the timing marks.

Easy-to-Use: Insert tool into the flywheel housing until it engages the ring gear, attach ½” square drive racket or breaker bar to turn.

Yellow-zinc chromate finish for longer-lasting rust prevention.

GEAR PULLER TOOL FEATURES:

CNC-Machined tool quickly separates gear from pump driveshaft.

Pump Gear Pulley Tool for 1988-2018 Dodge Cummins 5.9L/6.7L/8.3L. (Possible later model years)

Increase speed and efficiency

24V SPRING COMPRESSOR FEATURES:

Tapered bore holes stops valve keepers from falling through the tool and reduces the chance of dropping a valve keeper in your engine.

Designed to easily change valve springs, seals or retainers on Cummins 24V 5.9L and 6.7L. CNC-machined thick heavy aluminum in an economic raw finish.

Increase speed and efficiency by simultaneously compressing all four springs in the cylinder in one step for easy replacement.

CNC-Machined bridge places fully threaded stud on the center line of the injector bore to apply equally distributed force on all four valve springs.

INJECTOR NOZZLE TOOL FEATURES:

Simply clamp tool in vice and then slide injector in the appropriate opening to mak injector swap easier

Precision-cut from 3/16" thick steel will resist bending. (DO NOT OVER-TIGHTEN)

Custom fit openings stops injectors from spinning while removing the nozzle preventing damage to injectors by placing them directly in a vice

Tool will hold injectors for both 5.9L and 6.7L Cummins

ProductSiteLaunchDate : 2012-09-04T00:00:01-00:00
Size : Extra Large
StreetDate : 2012-09-04T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600
WarrantyDescription : 1 Year Limited