Cart 2 india

Specification
Brand : EODSAD
BulletPoint1 : Wide Application: Used for engine valve grinding, it is a practical and professional vehicle maintenance tool. High‑quality stainless steel material, sturdy and durable, which can work in harsh environments
BulletPoint2 : Valve Lapping Compound Tool: First valve top screw tightening, the inlet joint and the air supply is switched on, then the suck of the adsorber is valve grinding, loosen the valve top wire grinding machine starts to work, suction valve height control in 5-15mm, fine slow as a criterion, master in low-speed optimal and observed at any time be made of surface grinder, grinding to prevent excessive
BulletPoint3 : Working pressure: 3-6kg/cm³; Working stroke: 11-15mm; Effective frequency: 100-300times/min; Working speed: 10-40Rev / min; Gas consumption: 0.28m³/min
BulletPoint4 : Malfunction Phenomenon: 1. can not run after the air supply is connected 2. impact is weak 3. suddenly stop rotating during work. The above reasons are generally due to the internal dirt and grease. Elimination method: open the air cap, use gasoline to clean the dirt, remove burrs, can be restored
BulletPoint5 : Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Color : popular
ExternallyAssignedProductIdentifier1 : 755496951427
ExternallyAssignedProductIdentifier2 : 0755496951427
FabricType : Does not apply
FitType : Universal
ItemName : EODSAD Automotive Engine Valve Lapping Tool, Pneumatic Motor Valve Grinder, Auto Cylinder Head Valve Grinding Tool, Engine Valve Grinding Kit Car Grinder
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 22.5 centimeters
ItemPackageDimensions_Width : 20.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-valve-train-tools
Manufacturer : EODSAD
Material : Forged Steel
ModelNumber : EODSAD025
PartNumber : EODSAD025
ProductDescription : Specifications:
Model:QM-20B
Working pressure: 3-6kg/cm³
Working stroke: 11-15mm
Effective frequency: 100-300times/min
Working speed: 10-40Rev / min
Gas consumption: 0.28m³/min
Weight:1.2kg
Usage: automotive, motorcycle and engine valve grinding repairs

Package Including
1 x Set of Pneumatic valve grinding machine
ProductSiteLaunchDate : 2024-02-02T06:53:26.919Z
Size : normal
Style : QM-20B
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 40141600