Cart 2 india

Specification
Brand : HJCMOONB
BulletPoint1 : Valves
BulletPoint2 : Solenoid Valves
BulletPoint3 : Right angle pulse valve SCG353A051/047/060 pulse valve AMF-Z-62/50/40 electromagnetic pulse valve
BulletPoint4 : 【User-friendly Installation】- No hassle, just pure convenience. Our Adapter provides easy installation thanks to the flat side designed for secure tightening with a wrench. Experience the and ease of use of our adapter.
BulletPoint5 : 【Efficiency at Work】- Streamline your workflow with our Lathe Headstock Spindle Adapter. Acting as a crucial connection point, it accommodates various accessories such as chucks, faceplates, and other related tools enhancing your working efficiency.
Color : One Color
Department : unisex-adult
ExternallyAssignedProductIdentifier : 7759465881428
IncludedComponents : No
ItemName : HJCMOONB Right Angle Pulse Valve SCG353A051/047/060 Pulse Valve AMF-Z-62/50/40 electromagnetic Pulse Valve(SCG353A051)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-check-valves
Manufacturer : HJCMOONB
ModelName : HJCMOONB
ModelNumber : HJCMOONB
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : HJCMOONB
PowerSourceType : AC/DC
ProductDescription : Valves
Solenoid Valves
Direction of flow: Consult customer service
Drive mode: pulse
Applicable media: air
Valve function: sewage discharge
Type (channel position): Right angle
1. Product introduction
DMF-Z-20/25 right-angle electromagnetic pulse valve right-angle six-point/one-inch electromagnetic pulse valve
The DMF-Z electromagnetic pulse valve is a right-angle valve with an angle of 90° between its inlet and which is suitable for the installation and connection of the air bag and the dust collector blow pipe. The air flow is smooth and can provide dust cleaning gas pulses that meet the requirements.
inch20inch"25" refers to the nominal diameter. DMF-Z-20 represents a 3/4 inch which is a 6-minute right-angle pulse valve and DMF-Z-25 represents a 1" inch which is a 1-inch right-angle pulse valve.
2. Working principle
The diaphragm divides the electromagnetic pulse valve into two air chambers front and rear. When the compressed air is turned on the compressed air enters the rear air chamber through the throttle hole. At this time the pressure of the rear air chamber presses the diaphragm assembly close to the output port of the valve. The electromagnetic pulse valve is in the "closed" state.
The electrical signal from the pulse injection controller causes the armature of the electromagnetic pulse valve to move backward the vent hole in the rear air chamber of the valve opens the rear air chamber rapidly loses pressure the diaphragm assembly moves backward the compressed air is blown through the valve output port and the electromagnetic pulse valve is in the "On" status.
The electrical signal of the pulse injection controller disappears the armature of the electromagnetic pulse valve is reset the vent hole of the rear air chamber is closed the pressure in the rear air chamber increases causing the diaphragm assembly to be close to the output port of the valve and the e
ProductSiteLaunchDate : 2025-03-28T10:01:42.686Z
Size : SCG353A051
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600