Cart 2 india

Specification
Brand : Browning
BulletPoint1 : Utilize "ground form" design which reduces vibration, wear and initial belt tension loss.
BulletPoint2 : New EPDM Material offers expanded operating temperature range from -60 degrees F to +230 degrees F
BulletPoint3 : Fabric on top and bottom of belt provides enhanced stabilty and performance.
BulletPoint4 : Greater belt sidewall mass provides additional contact with the sheave.
BulletPoint5 : Browning CODE 1 matched tolerance
Color : Black
CompatibleDevices : Mars 74649 compatible devices
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 662289175345
ExternallyAssignedProductIdentifier2 : 0662289175345
ExternallyAssignedProductIdentifier3 : 00662289175345
ItemDisplayDimensions_Width : 6.1 inches
ItemDisplayWeight : 0.9 pounds
ItemName : Browning BX103 Gripnotch Belt, BX Belt Section, 104.8 Pitch Length
ItemPackageDimensions_Height : 40.64 centimeters
ItemPackageDimensions_Length : 4.064 centimeters
ItemPackageDimensions_Width : 12.7 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : industrial-v-belts
Manufacturer : Regal
Material : Ethylene Propylene Diene Monomer (EPDM)
Material1 : Rubber
Material2 : Polyurethane (PU)
ModelNumber : BX103
NumberOfItems : 1
PartNumber : BX103
ProductDescription : V-Belts are the most common type of drive belt used for power transmission. They provide the best combination of traction, speed transfer, load distribution, and extended service life.
The surface of EPDM has high strength resistance, which can improve the strength of the belt and disperse the stress generated on the surface of the belt during work, thus reducing the cracks on the surface of the belt, further increasing the service life and reducing the cost of use.
Fit for many industrial applications, agricultural machinery, engineering machinery, etc.
Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys and shaft too great.
How to measure the length of the required belt:Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

ProductSiteLaunchDate : 2013-10-11T23:23:21.180Z
Size : BX Belt Section
StreetDate : 2017-11-05T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111800