Cart 2 india

Specification
Brand : D&D PowerDrive
BulletPoint1 : The belts exceed USA RMA published ratings levels. They are designed to perform at the identical or higher level than all other major USA Manufacturer's belts of the same type
BulletPoint2 : Belts may not come in a cardboard sleeve
BulletPoint3 : The lower, compression section of the belt is made of highly fiber reinforced, oil and heat resistant
BulletPoint4 : Engineered synthetic rubber compound, specifically compounded for excellent wear resistance, cool running, and flexibility
BulletPoint5 : Note - Confirm the Size before ordering. Accurate measurement of v-belt length should be done with a belt measuring tool or a soft ruler, not a steel ruler. The width and thickness of the belt should also be measured to confirm the type of belt.
BulletPoint6 : Fit type: Universal Fit
Color : Multi
CompatibleDevices : Car
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 190859778943
ExternallyAssignedProductIdentifier2 : 0190859778943
ExternallyAssignedProductIdentifier3 : 00023899419609
GpsrSafetyAttestation : 1
IncludedComponents : OEM Replacement Belt
ItemDisplayDimensions_Width : 5 inches
ItemName : D&D DURA-Extreme BX27 V-Belt 5/8 x 30in Vbelt
ItemPackageDimensions_Height : 26.9 centimeters
ItemPackageDimensions_Length : 3.1 centimeters
ItemPackageDimensions_Width : 23.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-v-belts
Manufacturer : D&D PowerDrive
Material : Rubber
ModelNumber : BX27
NumberOfItems : 1
PackageLevel : unit
PartNumber : BX27
ProductDescription : V-Belts are the most common type of drive belt used for power transmission. They provide the best combination of traction, speed transfer, load distribution, and extended service life.
Made of neoprene rubber material, high-temperature resistance, wear resistance, corrosion resistance, high coefficient of friction. The outside fabric wrap is treated with high oil and heat resistant.
Fit for many industrial applications, agricultural machinery, engineering machinery, etc.
Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys and shaft too great.
How to measure the length of the required belt:Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

ProductSiteLaunchDate : 2016-01-13T22:18:31.046Z
Size : 991mm
StreetDate : 2017-03-12T00:00:01Z
Style : A44/4L460
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111800