Cart 2 india

Specification
Brand : D&D PowerDrive
BulletPoint1 : Belt a/4L 1/2 inches x 38 inches oc
BulletPoint2 : The belts exceed USA RMA published ratings levels
BulletPoint3 : They are designed to perform at the identical or higher level than all other major USA manufacturer's belts of the same Type
BulletPoint4 : Package Weight : 1.02 pounds
BulletPoint5 : 5- Take Notice Of - When installing the V-belt, ensure proper tensioning and alignment with the pulleys. Check for any signs of wear, cracking, or damage regularly, and replace if necessary. Produced according to the Japanese standard JIS K 6323, the length will be less than the same specification of the American-standard RMA_IP20.
Color : Multicolor
CompatibleDevices : Car
ExternallyAssignedProductIdentifier1 : 072053445824
ExternallyAssignedProductIdentifier2 : 0072053445824
ExternallyAssignedProductIdentifier3 : 00072053445824
IncludedComponents : Gates BX43 Tri-Power Belt
ItemName : D&D PowerDrive A36/4L380 Fairbanks Morse Engine Replacement Belt, A/4L, 1 -Band, 38" Length, Rubber
ItemPackageDimensions_Height : 32.1 centimeters
ItemPackageDimensions_Length : 3.9 centimeters
ItemPackageDimensions_Width : 24.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-v-belts
Manufacturer : OffRoad Belts
Material : Rubber
ModelNumber : A36/4L380
NumberOfItems : 1
PackageLevel : unit
PartNumber : A36/4L380
ProductDescription : APPLICATION：
It's called a V-belt because of its "V" shaped cross-section. All belts wear out over time and need to be replaced.
-V-belts can be found in driving mechanisms, such as engines in air compressors, fans, and pumps.
-Wrapped V-belts give premium belt performance. A V-belt is the rubber belt that drives the alternator, air conditioning compressor, power steering pump, and water pump.

ABOUT THIS PRODUCTS/FEATURES：
-A is a classical V-belt where single belts have a nominal thickness of 5/16" and a nominal top width of 1/2". The top width for banded belts varies depending on the number of belts fused together.
-The belts are constructed of highly engineered, high-performance components. A V-belt is a wedge-shaped belt made of rubber compound and reinforced with tension cords specially designed to transfer power into motion.
-The outer fabric wrap is treated with oil and heat-resistant, engineered synthetic rubber compound, specifically compound for excellent wear resistance, proven through thousands of hours of testing.
-The wound tensile cords are specially engineered, twisted, heat-, chemically set, neoprene rubber material.
-The body rubber compound is a highly engineered synthetic rubber compound.

SPECIFICATION：
Model: M-28
Pitch Girth: 28 Inch
Width: 10mm
Thickness: 5.5mm
Material: Rubber

TAKE NOTICE OF/TIPS:
-When installing the V-belt, ensure proper tensioning and alignment with the pulleys. Check for any signs of wear, cracking, or damage regularly, and replace if necessary.
ProductSiteLaunchDate : 2016-11-09T08:00:01.000Z
Size : M-28
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111500