Cart 2 india

Specification
Brand : Gates
BulletPoint1 : These “narrow” cross-sections can transmit up to three times the horsepower of the classical cross-sections (A, B, C, and D) in the same amount of drive space
BulletPoint2 : Suitable for all industrial applications, particularly where space, weight and horsepower capacity are critical
BulletPoint3 : Gates Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life
BulletPoint4 : Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
BulletPoint5 : The Flex-Weave Cover is a patented construction for longer cover life, providing extended protection to the core of the belt from oil, dirt, and heat
Color : Black
CompatibleDevices : Small Compressor, Pump, Lawnmower, Drill, Saw
ExternallyAssignedProductIdentifier1 : 072053016031
ExternallyAssignedProductIdentifier2 : 0072053016031
ExternallyAssignedProductIdentifier3 : 00072053016031
GpsrSafetyAttestation : 1
IncludedComponents : Gates 3VX355 Super HC Molded Notch Belt
ItemName : Gates 3VX355 Super HC Molded Notch Belt
ItemPackageDimensions_Height : 40 centimeters
ItemPackageDimensions_Length : 0.8 centimeters
ItemPackageDimensions_Width : 8.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-v-belts
Manufacturer : Gates
Material : Nitrile Rubber
ModelNumber : 3VX355
NumberOfItems : 1
PackageLevel : unit
PartNumber : 3VX355
ProductDescription : DescriptionsV-belts are the most common type of drive belt used for power transmission. The V-shaped ribs increase the contact area between the belt and pulleys, they provide the best combination of traction, speed transfer, load distribution, and extended service life.
The multi-rib belt offers the flexibility of a flat belt while delivering the high power transmission performance of a traditional V-belt.
Made of nitrile butadiene rubber material, high-temperature resistance, oil resistance, wear resistance, and high coefficient of friction.
Fit for many industrial machinery, appliances, and power tools, such as small compressors, pumps, drills, and saws.
Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys and shaft too great.
How to measure the length of the required belt?Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

ProductSiteLaunchDate : 2007-12-02T00:00:00-00:00
Size : 18" Length
StreetDate : 2017-10-28T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111800