Cart 2 india

Specification
Brand : Gates
BulletPoint1 : Provides superior performance on the toughest heavy-duty A, B and C Section industrial drives
BulletPoint2 : Suitable for all industrial applications, particularly where small orsub-minimal sheave diameters are required
BulletPoint3 : Notches molded into the belt during manufacturing make this belt well suited for drives with smaller diameter sheaves
BulletPoint4 : Belt edge is machined for even sheave groove contact resulting in less slip and wear
BulletPoint5 : Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
Color : Multicolor
CompatibleDevices : Lawn Mower
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 072053015096
ExternallyAssignedProductIdentifier2 : 0072053015096
ExternallyAssignedProductIdentifier3 : 00072053015096
GpsrSafetyAttestation : 1
IncludedComponents : Gates BX40 Tri-Power Belt
ItemDisplayWeight : 0.34 pounds
ItemName : Gates BX40 Tri-Power Belt
ItemPackageDimensions_Height : 48.26 centimeters
ItemPackageDimensions_Length : 1.778 centimeters
ItemPackageDimensions_Width : 12.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-v-belts
Manufacturer : Gates
Material : Rubber
ModelNumber : BX40
NumberOfItems : 1
PackageLevel : unit
PartNumber : BX40
ProductDescription : DescriptionsV-belts are the most common type of drive belt used for power transmission. The V-shaped ribs increase the contact area between the belt and pulleys, they provide the best combination of traction, speed transfer, load distribution, and extended service life.
The multi-rib belt offers the flexibility of a flat belt while delivering the high power transmission performance of a traditional V-belt.
Made of EPDM rubber material, high-temperature resistance, oil resistance, wear resistance, and high coefficient of friction.
Fit for many industrial machinery, appliances, and power tools, such as small compressors, pumps, drills, and saws.
Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys, and shaft too great.
How to measure the length of the required belt?Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

ProductSiteLaunchDate : 2008-01-01T00:00:00-00:00
Size : 390j6
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111800